Replacement Parts Lists; Reference Chart; Original And New Parts Comparison Lists - Panasonic KX-FLB752CX Service Manual

KX-FLB752CX

1 REPLACEMENT PARTS LISTS

1.1.

REFERENCE CHART

Reason for Change
*The following items (1-8) indicate the reason for change. See the "Notes" column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the "Notes" column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
Parts Set Production
V Original Early (before change)
New Late (after change)
W Original Early (before change)
New Late (after change)
X Original Early (before change)
New Late (after change)
Y Original Early (before change)
New Late (after change)
Z Other
Note:
Alphabets in the "Remarks" column in the following lists correspond to the alphabets in the "Remarks" in REFERENCE
CHART.
1.2.

ORIGINAL AND NEW PARTS COMPARISON LISTS

Change of the Suffix Code
Suffix Code
A→B
B→C
Serial No.Label tells you the suffix code as follows.
Ref No.
Original (Old)
CABINET AND ELECTRICAL PARTS
10 PFKV1051Z1
21 PFKV1050W 1
35→ → → → 36 PFDR1029Z
36→ → → → 35 PFUS1340Z
41 PFUE1011Z1
95 PFUS1342Z
161 PFDS1003Y
163 PFMH1090Z
187 PFHX1509Z
189 PFGX1004Z
190 PFGX1002Z
191 PFGX1003Z
193 PFHX1561Z
236 PFGT1956Z-M
Remarks:
*a: To improve the ADF performance.
*b: Change of company name.
*c: The label which wrote the paper jam removal method is added.
*d: To show the PC software compatible with WindowsNT4.0/XP.
*e: To improve the quality.
*f: To correct error writing.
*g: The reinforcement coutermeasure of the EXIT SENSOR LEVER.
*h: To improve the tactile response of the Key.
*j: To share the parts with other models.
*k: To increase the safety margin.
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
New parts only may be used in early or late production sets.
Stock new parts.
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
The pressure roller is changed to prevent a paper jam.
To upgrade the PC software to support for WindowsNT4.0/XP.
Part No.
New
PFKV1051X1 COVER
PFKV1050V1 COVER, TOP
PFDR1029Z ROLLER, FEED PINCH
PFUS1340Z LEAF SPRING, FEED PINCH
PFUE1011Y1 FRAME, CONVEYOR MAIN
PFUS1342Y LEAF SPRING
PFDS1003X ROLLER, TRANSFER
PFMH1090Y METAL PART
PFGV1016Z COVER, LCD PROTECT
PFGX1015Y PUSH BUTTON, STOP
PFGX1013Y PUSH BUTTON, COPY
PFGX1014Y PUSH BUTTON, FAX
---------- COVER, SHEET
PFGT1956Y-M NAME PLATE
Reasons of change
Part Name & Descriptions
2
Pcs/Set Remarks Notes
1 *a 1
*1 1 *a 1
1 *f 7
1 *f 7
*1 1 *a 1
1 *a 1
1 *j 8
*2 1 *e 1
1 *e 1
1 *h 1
1 *h 1
1 *h 1
*2 1 *e 6
1 *b 8
Suffix
X
X
---
---
X
X
V
V
X
X
X
X
X
X