Related Manuals for argon audio Octave 3A
Summary of Contents for argon audio Octave 3A
- Page 1 O c t a v e 3 A OWNER’S MANUAL ILLUSTRATIONS SPECIFICATIONS TROUBLESHOOT w w w . a r g o n a u d i o . c o m...
- Page 2 After unpacking please check for any damage from This is the optimal way of placement. transport. The Argon Octave 3A is designed to play single-standing, if We recommend that you keep the original carton box and the room is not too big.
- Page 3 We don’t recommend use of any solvents or cleaners on may expose you to dangerous voltages or other hazards. Argon Octave 3A cabinets, the cabinet surface usually only Please contact the manufacturer to be referred to an authorized service center near you. To prevent risk of fire or requires dusting or cleaning with a damp soft cloth (only use cold clean water).
- Page 4 O c t a v e 3 A Front panel, input indicators Power ON/OFF LED • Lights Blue when “ON” • Lights Red when “OFF” w w w . a r g o n a u d i o . c o m...
-
Page 5: Rear Panel And Connections
O c t a v e 3 A Rear panel and connections Bluetooth disconnect and ready for discover mode Volume control and On/Off switch. Turn the knob to adjust the volume up or down. Connection to (right) Turn to power the speaker On or Off. Passive speaker Analogue 3,5 Mini-Jack input for USB Audio connection for connecting... -
Page 6: Connecting Your Speakers
O c t a v e 3 A Connecting your speakers STEP 1 STEP 2 STEP 1 Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the right speaker using at least decent speaker cable, to enhance sound quality. - Page 7 Connect the single RCA plug to your Argon Octave 3A. Your subwoofer might have input for one RCA plug just like there is only one RCA output plug from the Argon Octave 3A. Connect using this single RCA plug at both ends.
- Page 8 O c t a v e 3 A Use of Audio inputs on Argon Octave 3A USB AUDIO Your Argon Audio Octave 3A is equipped with a USB Audio Your Argon Audio Octave 3A has 3 different audio inputs: Digital input (shown marked no.1 on the drawing)
- Page 9 O c t a v e 3 A Use of analogue audio connection Analogue audio connection Your Argon Octave 3A is equipped with a 3,5 mm mini jack analogue audio input. *2 is mini-jack 3,5 mm stereo input. Typically for use for connecting an iPod, Mp3 Player, PC or TV, but can also be used for DVD, CD etc.
- Page 10 It’s also recommended to press the “BT MATCH” button if you change to play from a USB or analogue connected source. • If you connect your Argon Audio Octave 3A to a PC/Laptop via Bluetooth, there might be a few things you need to be aware about, all depending on what operating system you have on your PC/Laptop •...
- Page 11 TV audio out and to the 3,5 mm mini jack input on settings Argon Octave 3A. Argon Octave 3A will always start up on the last used play back source, unless it’s not connected or turned on anymore. Manually turn Argon Octave 3A ON or OFF Turn the volume know all the way down to turn Off and you will hear a click.
-
Page 12: Basic Troubleshooting
O c t a v e 3 A Specifications Argon Octave 3A Basic Troubleshooting If the LED does not light up, check... Tweeters: 0,75 inch Silk Dome with Neo magnet that the AC power cord is firmly plugged into the rear panel Woofers: 2,5 inch paper cone and wall outlet.
Need help?
Do you have a question about the Octave 3A and is the answer not in the manual?
Questions and answers