NET iCube SERIES User Manual page 26

iCube SERIES SDK API Manual
int SaveToFile(int nCamIndex,char * Name)
iCube SDK_
Purpose: saves a bitmap, jpg.
description
parameters int CamIndex, char* Name
return value int stat
return value:
int stat:
IC_SUCCESS: success
else:
parameters:
int
nCamIndex:
char* Name: the name of the file, the extension sets the type of the saved image
int SetTrigger(int nCamIndex,int nMode)
iCube SDK_
Purpose: sets the Trigger mode.
description
parameters int CamIndex, int nMode
return value int stat
return value:
int stat:
IC_SUCCESS: success
else:
parameters:
int
nCamIndex:
Int nMode:
TRIG_HW_START:
N E T G m b H A l l R i g h t s R e s e r v e d
error
index of camera.
(bmp,jpg, tif).
error
index of camera.
TRIG_SW_START: starts the software trigger mode
TRIG_SW_DO :
starts the hardware trigger mode.
TRIG_STOP: stops soft/hardware trigger mode.
TRIG_SW_START_2: GRR mode
TRIG_HW_START_2 : GRR mode
get one software triggered frame.
(1500CU/BU >= FW x.4.11.x)
(1300CU >= FW x.1.12.x)
(1500CU/BU >= FW x.4.11.x)
(1300CU >= FW x.1.12.x)
.