Advertisement
2.
On the PC, click the Update Scale button. The message Wait for
Scale Connection is displayed. On the scale, Turn on the scale while
Pressing the HOLD button. Release the HOLD Button when the
message DNLOAD? is displayed. you may release the HOLD button
at this point and Press the ENTER button on the Remote Control
to start Updating your scale.
Be sure that the Infra-Red Remote is pointed at the front of the scale.
3.
Within seconds, you should see on your PC a progressing bar showing
downloading data to the Scale. When downloading is complete, the
message DONE is displayed in the LCD Window. You may now exit
the program, go off-Line and disconnect the computer from the scale.
The JQ-210 Digital Postal Scale is now ready for use without internet
connection until next Postal Rate change.
Scale Operation
Simple Weighing Mode
The JQ-210 Digital Postal Scale has a weight capacity from 0.2 oz. to 10
lbs. (4 g to 4.5 kg), and reads weight in increments of 0.1 oz. (2 g).
The Scale is set to start in Weighing mode on startup.
powering on the unit, be sure the Scale is placed on a stable and level
surface, and that there are no objects placed on the scale.
ON/OFF
Press the ON/OFF button to power up the scale. The LCD
display will briefly flash the current version number and
verify the stability of the scale.
Place an object to be weighed on the center of the scale.
The correct reading of weight will be displayed in the
default of pounds and ounces.
lb<>kg
Press this button to switch modes of measurement in
lbs./oz.
lbs.
oz.
HOLD
Press this button to hold the current reading for 2 minutes
or until the ZERO button is pressed. You may remove the
object on the scale and the LCD window will retain the
current weight reading.
8
Before
kg/g.
JQ-210 User Guide
Keypad Layout
Feature and Function Buttons
AC Download Jack
Large
Parcel
Holder
Scale Platform
On/Off
LCD Display
Infra-Red Sensor
On/Off
To turn the power to the scale on or off. If the
scale is on and idle for greater than 2 minutes, the
power will automatically be turned off.
lb <> kg
Toggles between display in lbs./oz. and kg/g
Zero
Offsets the weight of a container in Tare Mode.
Also resets the display to Weighing Mode.
Hold
Locks the current weight display.
IR Sensor
Activates reception of the command signals from
the Remote Unit.
Wt.
Activates numeric input of weight from a
manual entry.
$
Selects between Mailing Class and Postal Rates.
Enter
To confirm a selection or advance the menu.
Clear
Clears Tare memory in Weighing Mode. Also used
to back up 1 step in Rate Calculating mode.
Up (
), Down ( )
Moves menu selections forward or backward.
Service
Activates additional Postal Services browseable
with the
IR Transmitter
Communicates with the Digital Scale. Keep this
area clean and free of fingerprints.
JQ-210 User Guide
PC Adapter Jack
Infra-Red
Transmitter
Parcel Catch
0 to 9
number keys
Wt.
lb <> kg
Zero
Down
Hold
and
buttons.
Service
Clear
Enter
$
Hold
Up
5
Advertisement
