Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Datapath Vision800-RPSU
- Page 1 Vision800-RPSU Vision800-ATX Quick Start Guide Version: 1.0.2...
-
Page 2: Safety Instructions
Datapath para su reparación según los procedimientos RMA (Return Merchandise Agreement) de At the end of life all Datapath products should be disposed of as per local laws and regulations dictate. In UK contact Datapath to Datapath. - Page 3 Vision800 Congratulations on your purchase. The Vision800 is a powerful, Quad Core Industrial PC providing a video wall controller solution capable of capturing RGB/HD/HDMI/HD-SDI/SD-SDI/3g-SDI/DVI/SD Composite and S-Video sources. The captured sources can be displayed anywhere on the display wall using our Wall Control-red Windows®...
- Page 4 Step 2 Unpacking The Vision800 chassis is heavy, lifting precautions should be taken. Inspect items for damage. Should any items show any signs of damage, report it immediately to your vendor. Attention! The Vision800 contains additional packaging inside the chassis. This MUST be removed prior to operation by removing the chassis lid via the 4 screws, 2 located on each side of the case lid.
- Page 5 Rear View Each custom configured Vision800 will differ depending on the number of output cards and capture cards installed. The illustration below (Fig.3) is an example of the rear panel and shows the six types of card that may be installed in the Vision800: •...
-
Page 6: Getting Started
Step 3 Getting Started Connect the USB Keyboard, Mouse and Wall Control software USB Key (unless fitted internally on request) into vacant USB connectors located on the SBC Backplane. (Fig.3 - Connect the Power Cable(s) to the chassis (Fig.3 - P1). - Page 7 How to Connect Input Sources The system provides up to four types of input connector, DVI-I (Fig.3 – 3/4/5/8), DVI-D (Fig.3 -9), BNC (Fig.3 10-12) and D-type (Fig.3 –6-7). The DVI-I connector supports DVI, HDMI, Component and RGB (VGA) inputs using the supplied adapters where required.
- Page 8 A Dual Link DVI input is connected directly into the DVI-D Dual Link connector. Input cables are not supplied. Fig.9 SD-SDI/HD-SDI and a 3G-SDI inputs are connected directly into the BNC connector on the VisionSDI2 card. Input cables are not supplied. Fig.10 SD Composite or S-Video inputs are connected to the D-Type Connector on the VisionSD8 Capture card using the supplied Composite/S-Video Cable:...
- Page 9 Use of SD Composite/S-Video Input cables The Composite/S-Video input cable consists of 16 BNC sockets numbered 1-16, connected to a 26-way D connector. For Composite input signals only the first 8 BNC sockets are used. To connect a video input, connect the Composite/S-Video Luma and Chroma signal as indicated in the table below: Input Composite/S-Video Luma =...
- Page 10 Step 4 Switching on the Vision800 Ensure that the Power Supply Unit(s) are switched on (Fig.3 - P2). Press and release the main power switch (Fig.2- F3). The BIOS and boot messages will appear on the Control Screen that is plugged into the VGA output socket on the SBC (Fig.3 - S4).
- Page 11 If you wish to change the default factory settings, use the TWIN tab to set the number of screens, Screen Arrangement and Resolution per Screen (Fig.14). Fig.14 Click Apply and then OK. In some instances, these changes may require a system re-start.
-
Page 12: Wall Control
Step 5 Wall Control Wall Control can be used to interactively move, size and position application windows and input windows on the display wall. Wall Control has a guide and grid function to aid the positioning of windows. You can save specific wall layouts as .lay files allowing them to be re-called when required. For more detailed information on the functionality of Wall Control, consult the Wall Control online help. -
Page 13: Component Input
Icons Displayed in the Application Toolbar Composite input S-Video input DVI input Analog input Component input SDI input DVI Dual Link input IP Camera input If an icon is highlighted green, this indicates that an active input of that type is present. For example in Fig.14 input 4 indicates that DVI is currently being captured. -
Page 14: Quality Assurance
Further soak tested for a minimum of 12 hours running Wall Control and a commercial PC stress testing application. Date of QA Test: …………………………………. Authorised Signature………………………………. MAIN SALES DEPARTMENT Datapath Limited, Alfreton Road Derby, DE21 4AD England Tel: (+44) (0) 1332 294441 Fax: (+44) (0) 1332 290667 email: sales@datapath.co.uk...