Getting Started - Videoswitch VS - 12 User Manual

VS Series 2
2.

Getting Started

1/ Connect the switcher up as shown:
This diagram show the VS-28A. For other switchers, fewer camera inputs and
monitor outputs are available.
2/ Identify the 8 switches on the switcher which are visible through the cut-out in
the base of the unit near the front edge. Set all switches OFF except for
sections 1,2 and 3 which should ON (assuming 8 cameras).
3/ Switch ON the mains power. The switcher powers up in AUTO mode. Press a
camera select key to cancel the auto mode and view a particular camera.
Video Switch
User Manual Page 3
VST605C.DOC