J.S. Technology HDMI to S-Video and Composite Converter Instruction Manual

Technical Specification.
Input:
1x HDMI at 480p (60Hz)/576p (50Hz) or 720p/1080i/1080p in either 50 or 60Hz.
HDMI 1.3 and HDCP compatible.
Output:
Either 1x S-Video (Y: 1.0Vpp, C: 0.3Vpp) or 1x Composite CVBS (1.0Vpp).
PAL or NTSC as per selection.
Left and Right stereo audio.
Power:
Supplied with a 5V 2A power supply.
Power consumption maximum 5W
Dimensions:
118 x 84 x 28mm.
WARNING!
The HDMI to S-Video and Composite converter is supplied with a 230V mains
adaptor. All normal precautions should be observed towards electronics devices.
Do not spill any liquids on the unit or power supply. Do not attempt to service the
unit. Do not cover the unit, do allow for ventilation. Do not spray the unit with
any combustible substances.
In the unlikely event the unit falters for any reason, disconnect from the mains
supply and retry after a few minutes. Contact information is provided below.
© 2012.
E-mail: technical@js-technology.com Tel: 01294 471468
J.S. Technology Ltd.,
APL Centre,
Stevenston Ind. Est.,
Stevenston.
Ayrshire
KA20 3LR
HDMI to S-Video and Composite Converter.
http://www.js-technology.com
Instruction Manual.
 Converts HDMI to either S-Video or Composite video.
 Auto set up—no user intervention required.
 Ideal for TVs / Projectors / flat screen TVs with no HDMI input.
 Up to 1080p Full HD supported.
 Stereo Audio output.
 Easy to use.
It is recommended that good quality leads be used with the converter. Suitable cables
are available from J.S. Technology as well as most good retailers. The unit requires 5V
DC supply to operate, a suitable mains adaptor is provided.
Manual printed in UK/Europe.
Input
Output
2012.