Table of Contents
Advertisement
4
Installing the Printer Driver Using Plug and Play Under Windows Me/
98SE/98
1
With Windows running, insert the CD-ROM into your computer's CD-
ROM drive.
2
Turn on the machine.
3
When the machine is ready, connect it to the computer with the USB
cable.
The "Add New Hardware Wizard" dialog box appears.
4
Click [Next], and then select
device (Recommended)
❍
Click [Next] again.
5
Select [Specify a location], and then click [Browse...].
6
Browse to "Driver\(language)\Win9x" on the CD-ROM, and then click
[OK].
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win9x
7
Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].
8
The "Add New Hardware Wizard" dialog box appears again.
Repeat steps 4 through 7.
Note
Repeat steps 4 through 7 until the installation is completely
finished. This completes the installation of the printer driver.
4-4
Installing the Printer Driver
Search for the best driver for your
on the next dialog box.
Pi1803e/Pi2001e
Advertisement
Table of Contents
