Troubleshooting - VIETA VH-MS150BK User Manual

Troubleshooting

Symptom
No sound
No picture
No color
Not reading disc
Remote control failure
Temporary function failure
Rolling Picture
According to waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. If at any time in the futrue you need to dispose of this product
please DO NOT dispose of this product with household waste. Please send this product to WEEE
collecting points where available.
30
Cause
Cables not properly connected.
Disc warped or dirty.
Player in mute statues.
Cables not properly connected.
Correct input not selected on TV.
TV system not right.
TV set color not properly adjusted.
No disc in the player.
Disc not properly loaded.
Condensation on the laser head.
Remote control not pointing to the
sensor window.
Remote control's operating distance
is more than 8 meters away from the
TV.
Batteries low.
Poor quality disc used
Wrong buttons pressed.
External electrical interference
TV set not properly adjusted
Incorrect output format on
DVD unit
Solution
Connect cables securely.
Clean your disc.
Press MUTE button again.
Connect cables properly.
Reset the AV/TV status of your
TV set.
Press PAL/NTSC button.
Adjust color of the TV set.
Load a disc.
Reload a disc, with the label
side facing up.
Turn on the player, unload the
disc and leave it on for about
an hour.
Point the repote at the unit.
Use the remote control within
8 meters of the unit.
Replace the batteries.
Wait 5-10 secs and the player
wil return to normanl operation
once more.
Wait 1-3 seconds and press
correct button.
Turn off the player 1-2 mins then
switch back on. If problem
persists relocate the player or
eliminate source of interference.
Readjust TV system
Select correct output format
for your TV (PAL/NTSC)
DVD MICROSYTEM