Konica Minolta IP-011 User Manual page 35

[Paper] tab
[Front Cover]: On, Off, Blank and Printed
Specifies whether a front cover is attached or not. Also specifies whether the front cover is
blank or printed when it is attached.
[Back Cover]: On, Off, Blank and Printed
Specifies whether a back cover is attached or not. Also specifies whether the back cover is
blank or printed when it is attached.
[Front/Back Cover]-[Paper Tray]: Tray 1, Tray 2, Tray 3, Tray 4 and Bypass Tray
Specifies the output tray where paper for a front cover or a back cover is set.
[Front/Back Cover]-[Paper Type]: Plain
Specifies the paper type of a front cover or a back cover.
[Paper Type]: Plain, OHT Film, OHT Interleave and OHT Interleave Printed
Specifies the paper type of other paper than a front cover or a back cover.
Chapter 2 Setup
IP-011 Printer Controller 2-15