Ernest Sports ES12 Quick Start Manual

ES12 Quickstart Guide Ernest Sports Application
Welcome to the ES12 Portable Launch Download the Ernest Sports App at the
Monitor. This Quick Start Guide explains how Apple App Store SM
to set up and use key features of the ES12
Activate ES12.
and Smartphone Application. Once you
located on your activation card and/or the
understand the basics, you can download
back of your ES12 device. This is required to
the usermanual and learn more about using
have full functionality of the app.
your ES12 at www.ernestsports.com/ES12
ES12 Basics
Note: For best results, place your phone on
a setting that does not idle or sleep after a
A. LCD Display
short amount of time. This may cause you
to lose connection with the app, and your
B. Kickstand
information will not be saved.
C. Power Button
D. Club Selection Button
E. Blue Protective Boot
Note: After 8 minutes of idle time, the ES12
will automatically power off.
9:41 AM
WELCOME
RANGE DATA
WEATHER NOTES COURSE CADDY SETTINGS
Home
Android Pairing
Android Users: In order to pair the
or on Google Play TM . Android device properly, enter the
programming mode on the ES12 and
Use the 10 digit number
press the power button several times
until you reach the "PRG" (pairing)
mode. Now you will need to pair from
the Android device. The easiest way
is from the app, choose "Settings" >
"Setup Bluetooth" which takes you to the
Android's "Bluetooth Setting" page. Be
sure the Android's Bluetooth is set "ON".
If the ES12 shows "Paired" already, then
delete (unpair) the current ES12. Now
scan for devices. From here, you will pair
with the ES12 (the ES12 will not show
the 6-digit pairing number). After pairing,
your Android device will show "Paired"
or "Paired but not connected". Now exit
the programming mode by pressing the
power key several times until the ES12
shows the club.
Once paired, your Android device will
connect to the ES12 as needed unless
you reset the pairing on the ES12 or
unpair the Android device.
Selecting a Club
Apple Connecting
Apple Users: Initial pairing (and after To choose a club, press the Club Selection
pairing reset) MUST be completed from button on the ES12.
your Apple Bluetooth settings.
The club selection will be displayed on the
LCD panel at the top of the ES12 device.
Continue to press the Club Selection button
On your Apple device, go to "Settings"
until your desired club is shown on the LCD
> "Bluetooth". Turn the Bluetooth ON.
panel.
Scan for devices. When found, select
ES12 connect.
The club notations are as follows:
For future connections, press and hold
CODE CLUB
the club button on the ES12; "PRG" will
DrT Driver Total
blink, once blinking ends, your ES12
3Wd 3 Wood
should be connected to your Apple
5Wd 5 Wood
HYB Hybrid
device.
2Ir 2 Iron
3Ir 3 Iron
4Ir 4 Iron
5Ir 5 Iron
Position the ES12
Once club selection has been made, place
the ES12 device 12"-14" beside your ball
and 12"-14" downrange (see illustration
below).
Extend the kickstand out of the back of
the ES12.
Position the ES12 on the ground with the
front of the device facing downrange.
CODE CLUB
6Ir 6 Iron
7Ir 7 Iron
Note: ES12
8Ir 8 Iron
9Ir 9 Iron
should face
PW Pitching Wedge
toward target
GW Gap Wedge
SW Sand Wedge
LW Lob Wedge
14 "
14 "
App Welcome Page
9:41 AM
WELCOME
RANGE DATA VIDEO ANALYSIS SCORE CARD
WEATHER NOTES COURSE CADDY SETTINGS
Home
• Range Data: Start a new ES12 practice
session and/or view historical data.
• Video Analysis: Record, review and
analyze your golf swing.
• Score Card: Keep track of your golf
round and statistics.
• Weather: Review local weather.
• Notes: Take notes on your range
session and/or golf round.
• Course Caddy: Use your range
sessions to help determine club use.
• Settings: Set up Bluetooth and social
networking sites.