Download Print this page

Aquatic AI26AIR6636CF Specification Sheet

Aquatic serenity studio 26 specification sheet

Advertisement

Quick Links

SErENITy STudIO 26
SErENITy STudIO
Deck Width 4"
22"
Back Angle 23 º
65 1/2"
22 1/4"
52 3/4"
SPECIFICATIONS:

GeneRal SPecIfIcatIonS:

Tub Size
65 1/2" x 35 3/4" x 26 3/4"
166 cm x 91 cm x 68 cm
Bathing Well
39 1/2" long
22" wide
21 1/4" interior depth
Maximum Water Depth 16 1/2" / 42 cm
Shipping Weight
261 lbs. / 119 kg
Tub Weight Filled
902 lbs. / 410 kg
Tub Weight Only
197 lbs. / 90 kg
Gallons to Overflow
85 gal. / 322 L

electRIcal SPecIfIcatIonS:

Blower/Heater
1 HP; 10.5 AMP; 120V
Requirement
15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
fax-on-demand
document # 1006
Each Serenity Studio model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tempera-
ture will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming
from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4" variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
94
# AI26AIR6636CF / AI26AIR6636CFTo (Tub only)
Model
35 3/4"
39 1/2"
Deck Width 3 1/2"
3 1/4"
StandaRd eQUIPMent:
air Bath System:
- 67 Air Jets
- 1 HP Variable Speed Remote Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle
- Waterproof Remote Control with Infrared Sensor and 25' cord
aquatic Quality features:
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Extra Deep Bathing Well
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
Ul & IaPMo listed, factory tested
limited lifetime Warranty
note: The interior of bathing well and outside of bathing well can each
be specified in a different color. Only one premium color upcharge will be
applied if one or more premium colors are used.
note: This model requires a remote blower location. The connection for the
air blower is under the tub; the blower may be placed up to 15 feet away
and connected by piping under the floor. Please refer to the Owner's Manual
for detailed installation instructions. Document #1184 on our Fax-on Demand
System or on our website at www.aquaticwhirlpools.com.
35 3/4"
26 3/4"
23 3/4"
25 1/2"
Two Person Bath
Rough-In Plumbing
Measurements

oPtIonal eQUIPMent:

Comfort Pillow - Oval or Rectangle
Waste and Overflow for Freestanding Models
- Chrome, Polished Brass, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or White
Premium Colors
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
www.aquaticwhirlpools.com
January 2008
10"
2"
800.555.5324

Advertisement

loading

This manual is also suitable for:

Ai26air6636cftoSerenity studio 26 ai26air6636cfSerenity studio 26