Playback; Playing Discs Or Files; Quick View (Quick View With Audio) - Pioneer BDP-80FD Operating Instructions Manual

Chapter 4
04

Playback

Playing discs or files

This section describes the player's main operations.
For the types of discs and files that can be played, see
page 8. Video, image and audio files recorded on discs
are played with the Home Media Gallery (page 30).
Press  STANDBY/ON to turn on the power.
1
Turn the TV's power on and switch its input beforehand.
Press  OPEN/CLOSE to open the disc tray and
2
load the disc.
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player's front panel display.
• When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
Press  to play the disc.
3
• To pause, press  during playback.
• To stop, press  STOP during playback.
Note
• Some discs start playing automatically when the disc
tray is closed.
• BD-ROM/DVD-Video discs have parental lock
features. Input the password registered in the player's
settings to unlock the parental lock. For details, see
page 42.
• Some BD-R/-RE discs have playback protection. To
cancel the protection, input the password set for the
disc.
• If the picture and sound are not properly output,
Troubleshooting on page 50.
 If the disc menu is displayed
For some discs, the disc menu is displayed automatically
when playback starts. The contents of the disc menu and
the way to operate depend on the disc.
 Resuming playback from where it
was stopped (resume playback
function)
• When  STOP is pressed during playback, the point
at which the disc stopped is stored in the memory.
When  is pressed after that, playback resumes
from that point.
• To cancel the resume playback function, press
22
 STOP while playback is stopped.
En
Note
• The resume playback function is canceled
automatically in the following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs
this does not cancel the resume playback
function.)
– When it entered the Miracast / Wi-Fi Direct Mode
screen. (page 33)
• When you want to continue playback from a position
you specify to be played next time, see Playing
specified range of discs, titles or chapter (track/file) in
random order on page 29.
• The resume playback function cannot be used for
some discs.
Quick view (Quick view with
audio)
Audio is being output while the video images are played
back at about 1.5 times the normal speed.

Press  while playing back BD or DVD.
• If  is pressed during quick view, it will switch to
fast forward.
 To return to normal playback
• Press .
Note
• You cannot pause during quick view. Please pause
after returning to normal playback.
• As for the tone during quick view, the output comes
via PCM regardless of the configuration of the main
body of the device.
• It is not possible to switch the audio during quick
view.
• Depending on the audio format, such as Dolby
TrueHD and DTS-HD Master Audio,there might be no
sound output during fast-forward.
• For the output conditions of each voice, please refer
to About how digital audio formats are output on
page 46.