Selecting The Audio Mode; Changing Channel Settings; Scanning For Channels - Insignia NS-55E560A11 User Manual

Insignia 55" LED-LCD TV, 1080p
2 Press or to highlight Audio, then press
ENTER. The Audio menu opens.
Audio
Equalizer Setting
Balance
Digital Audio/SPDIF
SRS TruSurroundHD
MTS/SAP
Audio Language
Auto V olume
Reset Audio Settings
Move
Adjust Settings to effect sound quality
3 Press or to highlight an option, then press
ENTER to access the option. You can select:
• Equalizer Settings—Selects and changes the
audio frequency.
• Balance—Adjusts sound to the left or right
speakers.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select Off,
RAW, or PCM.
• SRS TruSurroundHD—Provides the ultimate
home theater sound solution. You can select
On or Off.
• MTS/SAP—Selects the sound mode (for
analog channels only). You can select:
• Mono—Produces a clearer sound if stereo
sound is difficult to hear.
• Stereo—Produces dynamic stereo sound
for sporting events and concerts.
• SAP—Selects a second language,
weather report, or added commentary, if
available.
• Audio Language—(Digital TV only) Selects
the audio language if multiple languages are
available.
• Auto Volume—Automatically adjusts volume
to be consistent across programs and
channels.
• Reset Audio Settings—Resets all audio
settings to the factory defaults.
4 Press or to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Selecting the audio mode

To select the audio mode for an analog channel:
• Press MTS/SAP one or more times. You can select:
• MONO—Select this option if there is noise or
static on weak stereo broadcasts.
• STEREO—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
Mono is automatically selected if the program is
broadcast in mono.
TM
Pictur e Audio Channels Settings
PCM
Off
Stereo
English
Off
Select
Previous
MENU
ENTER
.
www.insigniaproducts.com
or To select the audio mode for a digital channel:
• Press MTS/SAP. If an audio track is available, it
plays.

Changing channel settings

0
Note

Scanning for channels

Exit
EXIT
Note
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH + or CH –, your TV goes to the next or previous
channel in the channel list.
To scan for channels:
1 Press MENU. The on-screen menu opens.
Picture
Adjust Settings to affect picture quality.
2 Press
or ENTER. The Channels menu opens.
or
Channels
Auto Channel Search
Add/Skip Channel
Auto Zoom
Unless otherwise noted, all tasks in this section are
based on using the remote control.
• You do not need to scan for channels unless the
available channels changed after you ran the
Setup Wizard.
• You do not need to scan for channels if you are
using a cable box or satellite box.
TM
Picture Audio
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
Move Select
MENU
ENTER
or to highlight Channels, then press
TM
Pictur e Audio
Move Select
MENU
ENTER
Adjust channel options.
Channels Settings
Custom
40
52
50
0
5
Exit
Previous
EXIT
Channels Settings
On
Exit
Previous
EXIT
17