Related Manuals for Kramer PT-1C
Summary of Contents for Kramer PT-1C
- Page 1 K R A ME R E LE CT R O N IC S L TD . USER MANUAL MODEL: PT-1C EDID Processor P/N: 2900-300276 Rev 2...
-
Page 3: Table Of Contents
Introduction Getting Started Achieving the Best Performance Recycling Kramer Products Overview Defining the PT-1C EDID Processor Connecting the PT-1C Setting the DIP-Switches Technical Specifications Figures Figure 1: PT-1C EDID Processor Figure 2: Connecting the PT-1C EDID Processor PT-1C – Contents... -
Page 4: Introduction
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Products. Congratulations on purchasing your Kramer PT-1C EDID Processor, which is ideal for the following typical applications: ... -
Page 5: Getting Started
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer PT-1C away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. -
Page 6: Recycling Kramer Products
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. -
Page 7: Overview
Overview The PT-1C is an EDID processor for HDMI signals. It allows you to pass or block HDCP, deep audio or deep color signals that may or may not be compatible with the display. The PT-1C features: A maximum data rate of 10.2Gbps (3.4Gbps per data channel) ... -
Page 8: Connecting The Pt-1C
Connecting the PT-1C Always switch off the power to each device before connecting it to your PT-1C. After connecting your PT-1C, switch on the power to each device. To connect the PT-1C as illustrated in the example in Figure 1. Connect the HDMI source (for example, a DVD player) to the HDMI IN connector. -
Page 9: Setting The Dip-Switches
UP = limits the audio to 2-channel LPCM (linear pulse code modulation) DIP 4 controls HDCP: DOWN = passes HDCP UP = HDCP off Note: Color depth and audio status are activated only when lock/modify is up. PT-1C - Connecting the PT-1C... -
Page 10: Technical Specifications
10% to 90%, RHL non-condensing DIMENSIONS: 6.22cm x 2.41cm x 5.24cm (2.45" x 0.95" x 2.06") W, D, H. WEIGHT: 0.04kg (0.09lbs) approx. RK−4PT 19" rack adapter OPTIONS: Specifications are subject to change without notice at http://www.kramerelectronics.com PT-1C - Technical Specifications... - Page 12 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the PT-1C and is the answer not in the manual?
Questions and answers