The universal remote can be programmed to control most brands of remote contr&lable VCRs, satellite receivers and cable boxes. If you have an RCA, GE, or PROSCAN component, you may not need to program it at all. U s i n g t h e r e m o t e...
(VCR, DVD, Satellite, etc.) and programmed, will turn the device on and off. When pressed twice within two seconds, all devices that are on will be turned off (this feature only works with most RCA, PROSCAN and GE products).
In TV mode, press to toggle through the available input sources (VlDl/SVlDl, VID2/SVID2, current channel). In SAT mode, press to select available channel lists (RCA, Proscan, and GE only). A N T E N N A Functions as TV/VCR button in VCR mode and TV/receiver button in SATeCABLE mode.
The universal remote can be programmed to control most brands of remote controllable VCRs, satellite receivers and cable boxes. The remote is already programmed to control most RCA, GE and PROSCAN TVs, VCRs, DVD players, laserdisc players and satellite receivers.
code list on the last page of this section, Using the Remote. Press and hold the button on the remote you want to program. Enter the code from the code list. Release button, and then press ONeOFF to see if the component responds to the remote commands.
..2016,2018,2021,2058,2062,2064 2 0 1 4 (For RCA and Dimensia brands only) 2021 AM/FM ................,,..4003 2021 A B C ....