Samsung GALAXY MEGA 2 User Manual page 111

6. Place the two active NFC-enabled devices back to back
to begin.
Note: If the Touch to beam screen does not appear on the
source device:
- Pull them apart.
- Verify the image is visible in the preview window on
the source device (providing the file).
- Place them together again.
7. From the Touch to beam screen, touch the reduced
image preview to begin the transfer.
8. When prompted, separate the two devices. After a few
seconds (depending on file size) the recipient with then
see the transferred file displayed on their screen.
To share multiple photos using S Beam:
1. On the source device that contains the desired image
or video, touch
2. Locate the selected folder.
3. Touch and hold the first image and place a check mark
on it and all desired images.
4. Place the two active NFC-enabled devices back to back
to begin.
5. From the Touch to beam screen, touch the reduced
image preview to begin the transfer.
6. When prompted, separate the two devices.
7. The photos are transferred to the other device.
Apps Gallery.
Photos and Videos 105