Sharkoon FLEXI-DRIVE S2S Manual

Sharkoon FLEXI-DRIVE S2S Manual

Advertisement

FLEXI-DRIVE S2S
Manual
Flexi-Drive S2S
88

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLEXI-DRIVE S2S and is the answer not in the manual?

Questions and answers

Summary of Contents for Sharkoon FLEXI-DRIVE S2S

  • Page 1 FLEXI-DRIVE S2S Manual Flexi-Drive S2S...
  • Page 2 Content 1. Features 2. Specifications 3. Manual Flexi-Drive S2S...
  • Page 3: Specifications

    SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. Have a good time with our product! SHARKOON Technologies GmbH 1. Features • Fast modular SSD storage solution •...
  • Page 4 S2S, we recommend to use SDHC memory cards with SLC memory and a read/write rate of at least 20 MB/s. A – Jumper – SATA data connector (7-pin) – SATA power connector (15-pin) A – SATA I mode (1.5 Gbit/s) – SATA II mode (3 Gbit/s) Flexi-Drive S2S...
  • Page 5 1. Open the case by removing the three screws with a suitable screw driver (fig. 1) and take off the case’s cover (fig. 2). fig. 1 fig. 2 2. Carefully remove the PCB from the case (fig. 3). fig. 3 Flexi-Drive S2S...
  • Page 6 (e.g. 4GB + 8GB > 2x 4GB). To achieve the optimal data transfer rate insert cards in all 6 slots as the transfer rate rises according to the number of cards. Flexi-Drive S2S...
  • Page 7 All named products and descriptions are trademarks and/or registered trade- marks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product spe- cifications may vary.

Table of Contents