Do you have a question about the 137-3.5-CA and is the answer not in the manual?
Questions and answers
Kevin
April 29, 2025
Where is swith to control the gas
1 comments:
Mr. Anderson
May 15, 2025
The switch to control the gas on the McLane 137-3.5-CA is located on the engine. It is typically a fuel shut-off valve or lever found near the carburetor or fuel line. To turn the gas on, move the valve or lever to the "ON" or open position, and to shut off the gas, move it to the "OFF" or closed position. The exact location and labeling may vary slightly depending on the engine model used on the McLane 137-3.5-CA.
This answer is automatically generated
lexus.rose1@gmail.com
April 7, 2025
What's the difference between a 801-3.5-RP and a 137-3.5-CA? Its Parts breakdown sure does look like mine.
1 comments:
Mr. Anderson
April 9, 2025
The main differences between the McLane 801-3.5-RP and the McLane 137-3.5-CA are their intended functions and design features:
1. Function: - McLane 801-3.5-RP: This is a reel mower designed specifically for cutting grass with precision. It provides a clean, scissor-like cut suitable for creating a manicured lawn, especially for low-cut grasses like Bermuda or Zoysia. - McLane 137-3.5-CA: This is an edger designed for trimming the edges of lawns, driveways, and sidewalks. It creates sharp, defined lawn edges rather than mowing large grass areas.
2. Design and Blade Type: - 801-3.5-RP: Uses a reel blade system (typically 7 or 10 blades) that spins vertically and cuts against a stationary bed knife. - 137-3.5-CA: Uses a single rotating vertical blade designed to cut through turf and soil along edges.
3. Use Case: - 801-3.5-RP: Suitable for mowing entire lawns with a smooth, even finish. - 137-3.5-CA: Used for edging, not for mowing the main lawn area.
4. Engine: - Both models are typically powered by a 3.5 HP engine, often a Briggs & Stratton or similar.
In summary, the 801-3.5-RP is a reel mower for precision lawn mowing, while the 137-3.5-CA is an edger for creating clean lawn borders.
Need help?
Do you have a question about the 137-3.5-CA and is the answer not in the manual?
Questions and answers
Where is swith to control the gas
The switch to control the gas on the McLane 137-3.5-CA is located on the engine. It is typically a fuel shut-off valve or lever found near the carburetor or fuel line. To turn the gas on, move the valve or lever to the "ON" or open position, and to shut off the gas, move it to the "OFF" or closed position. The exact location and labeling may vary slightly depending on the engine model used on the McLane 137-3.5-CA.
This answer is automatically generated
What's the difference between a 801-3.5-RP and a 137-3.5-CA? Its Parts breakdown sure does look like mine.
The main differences between the McLane 801-3.5-RP and the McLane 137-3.5-CA are their intended functions and design features:
1. Function:
- McLane 801-3.5-RP: This is a reel mower designed specifically for cutting grass with precision. It provides a clean, scissor-like cut suitable for creating a manicured lawn, especially for low-cut grasses like Bermuda or Zoysia.
- McLane 137-3.5-CA: This is an edger designed for trimming the edges of lawns, driveways, and sidewalks. It creates sharp, defined lawn edges rather than mowing large grass areas.
2. Design and Blade Type:
- 801-3.5-RP: Uses a reel blade system (typically 7 or 10 blades) that spins vertically and cuts against a stationary bed knife.
- 137-3.5-CA: Uses a single rotating vertical blade designed to cut through turf and soil along edges.
3. Use Case:
- 801-3.5-RP: Suitable for mowing entire lawns with a smooth, even finish.
- 137-3.5-CA: Used for edging, not for mowing the main lawn area.
4. Engine:
- Both models are typically powered by a 3.5 HP engine, often a Briggs & Stratton or similar.
In summary, the 801-3.5-RP is a reel mower for precision lawn mowing, while the 137-3.5-CA is an edger for creating clean lawn borders.
This answer is automatically generated