Advertisement
OPERATION
Insertion and Removal of Cassette
Tape
1. Take up any slack in the tape by
turning one of the cassette's hubs
with a pencil.
See fig. 5.
CAUTION:
• If you do not remove the excess
slack, the tape might become
tangled in the record/playback
mechanism.
2. Open the Cassette Door G .
See fig. 6.
3. Load the cassette with its open
edge up, the side you want to play
facing out and its full reel to the
left.
See fig. 7.
4. Close the Cassette Door G .
6
fig. 5
G
fig. 6
fig. 7
OPERATION
Play
1. Load the cassette tape.
2. Set switch I to TAPE.
See fig. 8.
NOTE: To protect your hearing, set
Volume Control E to its lowest
setting before you begin playing
a cassette tape.
See fig. 9.
3. Put on your Headphones L and
plug into the Earphone Jack F .
See fig. 8.
4. Press the Play Button C and
adjust the Volume Control E for
the desired listening level. Stop
the tape by pressing the Stop
Button B .
See fig. 8 and 9.
Automatic Stop
-
Please note when the tape comes
to the end during play the tape will
stop automatically.
L
I
Side View
F
fig. 8
B
D
Top View
fig. 9
C
fig. 10
E
7
Advertisement
