Note On Humidity Level; Parts Identification - SPT digital ultrasonic humidifier with humidistat User Manual

NOTE ON HUMIDITY LEVEL

•
It is best to keep the humidity level between 30~50 percent of relative humidity.
•
The comfort level of humidity will vary from room to room and with changing room conditions.
•
In cold weather, windows and sometimes walls may fog or develop frost from excessive indoor
humidity. If this occurs, reduce the mist intensity setting to avoid damage from condensed water
dripping on windowsills.
•
Too much humidity in the room may allow moisture to accumulate on surfaces where bacteria and
fungi can grow. Moisture that gathers may also damage furniture, walls and wallpaper.
•
To eliminate excessive humidity, especially in smaller rooms, leave the room door or window open
and adjust the mist intensity control accordingly.

PARTS IDENTIFICATION

1. Base
2. Operation Panel
3. Sensor
4. Water tank cap
5. Water Inlet
6. Water tank
2
7. Mist Nozzle
8. Nebulizer
9. Exhaust outlet
Indicators:
A. Under Auto mode displays set humidity or
ambient humidity.
Under Continuous mode displays mist intensity
B. Ambient room temperature
C. Water out indicator
D. Auto mode indicator
E. Mist intensity indicator
•
Low = 4 bars
•
Med = 7 bars
•
High = 10 bars
F. Number of hours set under timer
G. Timer indicator
Controls:
1: Continuous mode / Mist Intensity control
2: Auto mode / set %
3: Timer
4: Power