Contec ATBA-16E User Manual

Buffer Amplifier Box for Analog Input Boards
Thank you for purchasing the CONTEC product.
The product consists of the items listed below. Check, with the following list, that your package is
complete. If you discover damaged or missing items, contact your retailer.
Product Configuration List
- ATBA-16E Termination Panel...1
- Power supply connector (MC1,5/3-ST-3,5)...1
- This User's Manual...1
- Warranty Certificate ...1
- Serial number label ...1
CAUTION
- Use this product in the specified environment (temperature and humidity).
- Do not use or store the product in a location exposed to extremely high or low temperature or
susceptible to rapid temperature changes.
For example:
- Clean the ATBA-16E by wiping lightly with a soft cloth moistened with water or a cleaning
solution.
Take care to avoid the use of benzene, thinners or other volatile solutions which may cause
deformation or discoloration.
- CONTEC will bear no responsibility for any problems, etc., resulting from modifying this product.
- When carrying the product, be careful not to apply direct vibration or shock to the board.
- The information in this document is subject to change without notice.
- All relevant issues have been considered in the preparation of this document. Should you notice
an omission or any questionable item in this document, please feel free to notify CONTEC CO.,
LTD.
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
- Other product and product names are trademarks of their respective holder.
1
ATBA-16E User's Manual
CONTEC CO.,LTD
- Do not exposure to direct sunlight
- In the vicinity of a heat source
.
User's Manual
CN2 (BOARD/CARD)
User's Manual
ATBA-16E
Warranty
Certificate
Warranty Certificate
POWER
Power supply connector
XXXX XXXXXXXXX
XXXX XXXXXXXXX
Serial number label
ATBA-16E