Lcd Monitor Brightness; Formatting Memory Cards - Minolta DiMAGE F300 Instruction Manual

LCD monitor brightness

Low
High
The brightness of the LCD monitor can be set in eleven
1
levels. The brightness setting screen is opened from the
basic section of the setup menu (p. 96). Use the left/right
keys of the controller (1) to adjust the brightness. The
monitor image will change accordingly. Press the central
2
button of the controller (2) to set the brightness level.
Enter

Formatting memory cards

When a memory card is formatted, all data on the card is erased.
The formatting function is used to erase all data on a memory card. Before formatting a memory
card, copy the data to a computer or storage device. Locking images will not protect them from being
deleted when the card is formatted. Always format the memory card using the camera; never use a
computer to format a card.
When the format option is selected and entered in the basic section of the setup menu (p. 96), a con-
firmation screen will appear. Choosing "Yes" will format the card, choosing "No" will cancel the format-
ting operation. A screen will appear to indicate the card has been formatted.
If the card-not-recognized message appears, the inserted card in the camera may need to be format-
ted. A memory card used in another camera may also have to be formatted before being used. If the
unable-to-use-card message appears, the card is not compatible with the camera and cannot be for-
matted.
98 S
ETUP MODE