Table of Contents
Advertisement
6.
Using the Control Panel on the Main Body
6.1 Power On/Off
① Press and release the power button on the E-bot's main body
to power the unit on or off.
② The HIMS logo appears, and loading time takes 30 to 40
seconds.
③ When the power is turned on, the boot-up sound is heard and
the Power Indicator changes to green. When the battery is
being charged, the Power Indicator is colored red.
④ Press the power button briefly again to place the E-bot into
sleep mode.
⑤ If you fold the E-bot while in sleep mode, the unit does not
power off, but rather, remains in Sleep Mode. Thus, pressing
the Power button quickly wakes up the unit from sleep mode
as it normally would.
⑥ When the unit is awaken from sleep mode, all option settings
return to the status they were in before sleep mode was
activated.
⑦ When the power is turned on, press and hold the power button
for more than 2 seconds to power the unit completely off.
※ Note: The advantage of Sleep mode is that loading time is
shortened.
※ Note: If the E-bot is in the folded position, it cannot be
powered on. If the E-bot is folded when it is turned on, the
power shuts completely off, except in the case of Sleep Mode
as described above.
P a g e
| 2 9
Advertisement
Table of Contents
