Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for YOYOCam G3
- Page 1 QUICK START GUIDE YOYOCam G3 GSM Remote Surveillance Camera www.yoyomotion.com...
- Page 2 YOYOCam G3 Features Insert a SIM card, perform a few simple configuration steps and YOYOCam is ready to guard your property. Infrared body detector and camera- Infrared LED lights enable the camera to based movement detection capture images in the dark...
- Page 3 Get to know YOYOCam G3 Infrared body detector GSM antenna Power switch Status indicator Infrared LED lights Camera Microphone Tempreture sensor Mount/tripod screw Antenna connector Power cable holes Battery compartment cover Fold-out stand...
-
Page 4: Step 1. Prepare Yoyocam G3
4. Move the battery out of the way as shown. • WARNING: Always be sure to switch off YOYOCam and disconnect the power before inserting or removing the SIM card. Do not touch the gold contacts of the SIM Card. •... -
Page 5: Step 2. Mount Yoyocam G3
5. Tighten the screw to fix YOYOCam in the desired position. Note: The mount screw-thread is standard photographic size, so YOYOCam can, for example, be mounted on a camera tripod. Note: For best results, avoid pointing YOYOCam at bright lights or windows. See the User Guide for more tips. -
Page 6: Step 3. Set Up Yoyocam G3
STEP 3. Set Up YOYOCam G3 1. Plug the power adaptor in to a wall outlet or socket strip. 2. Slide the power switch to the ON position to turn on YOYOCam 3. After approximately 40 seconds, YOYOCam bleeps to indicate that the GSM network has been found. - Page 7 For example, send #04#1234#6789# to change password to 6789. Send #06#0702222222# to add 0702222222 as a user. MASTER & USER Up to 10 Users set up by the Master can access YOYOCam. Master and Users can send these commands: Text to send What it does...
- Page 8 Factory Reset If the Master phone is lost or you want to set up YOYOCam again from the beginning, you can use Factory Reset to set all settings and parameters back to the factory default. Following Factory Reset you will need to re-pair the remote controls and any remote sensors, re-enter any mobile network (MMS) settings and reconfigure all users etc.
- Page 9 Do not attempt to take your YOYOCam apart; there are no user-serviceable components inside the product. • Do not allow children to play with your YOYOCam; small parts such as SIM cards could be detached and represent a choking hazard.
-
Page 10: Remote Control
The supplied Remote Controls are individually paired with YOYOCam at delivery. They can be paired manually e.g. after a factory reset of YOYOCam or to use one Remote Control for several YOYOCams. Up to five remotes can be used with each YOYOCam; two are supplied. - Page 11 • Place the SIM card in a mobile phone to check and if necessary switch off PIN-lock YOYOCam is out of reach for GSM-coverage. • Try YOYOCam in different positions for better signal strength, or use a high-gain external antenna with extension cable.
- Page 12 • This has no functional impact on YOYOCam. The built-in back-up battery keeps it running. • The SMS power notifications can be switched off by sending #144#0# to your YOYOCam’s mobile number. Master receives SMS saying that an incoming message is being forwarded.
-
Page 13: Defining Users
YOYOCam G3 - Complete Command List Note: CAPITALS (eg. OFF) denote default setting DEFINING USERS Master - register phone number #00# Master - transfer to a new phone number #14#NewMasterNumber# Password - change #04#OldPassword#NewPassword# Users - add number #06#UserNumber# Users - add several numbers (up to 10) #06#User1Number#...#User10Number#... -
Page 14: Alarm Functions
EXTERNAL WIRELESS SENSORS Pair and denominate, active when armed, SMS #05#SensorName# Pair and denominate, active when armed, MMS #05#*SensorName# Pair and denominate, always active, SMS #196#SensorName# Remove one or several sensors #112#SensorName#...#SensorName# Remove all sensors #112# ALARM FUNCTIONS #01# Disarm #02# Scheduled activation - on #128#1#... - Page 15 #207#ToNumber#SMSText# Remote Controls - remove all #111# Reset YOYOCam #08#Password# SCHEDULING DAYS 0 - Sun, 1 - Mon, 2 - Tue, 3 - Wed, 4 - Thu, 5 - Fri, 6 - Sat, 7 - Every day, 8 - Mon-Fri, 9 - Sat-Sun...