Related Manuals for Tool Shop 241-9796
Summary of Contents for Tool Shop 241-9796
- Page 1 241-9796 DETAIL/FINISH SANDER Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING :When using electric tools, machines or equipment, basic safety pre- cautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas can cause injuries. 2. - Page 3 IMPORTANT SAFETY INSTRUCTIONS 15. USE EYE PROTECTION. Use a full-face mask if the work you’re doing produces metal filings, dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the work involves creating a lot of fine or coarse dust.
-
Page 4: Specifications
SPECIFICATIONS = Voltage: 120 Volts AC, 60Hz = Current Rating: 0.8 amps = No load speed: 12,000 OPM = Dust-sealed front rocker switch = Sanding sheet size: 5-1/2” X 5-1/2” X 3-1/8” = Includes 3 pcs. sanding paper(80,120,180) FUNCTIONAL DESCRIPTION 1. -
Page 5: Maintenance
OPERATING PROCEDURES WARNING: Do not use torn or severely worn sandpaper. You may damage your work surface or suffer physical injury. 7. When you are done sanding the desired area, remove the sander from the work surface before turning the sander OFF. CONTROL THE DUST IN THE WORKPLACE. -
Page 6: Parts List
PARTS LIST Description Description Screw Label Sand paper Left housing Sanding plate Rubber cover Base support Screw Bearing Bearing Bushing Terminal block Bearing Cord clamp Cord guard Rotor Power cord Stator Screw Brush holder Screw Switch cover Right housing Switch Label SCHEMATIC DRAWING WARNING Repairs should be made by an authorized repair center.