Introduction; Safety Information - PCE Health and Fitness PCE-TC 30 Manual

1

Introduction

Thank you for purchasing a PCE-TC30 infrared camera from PCE Instruments.
The PCE-TC 30 thermographic camera is perfect for beginners. Its structure is very simple, which makes
it very uncomplicated to use. Therefore, users need little time to get used to the device. Its favourable
price is one of the many advantages of this infrared camera.
The device is commonly used in construction, electrical installation and diagnostics, as well as production
and maintenance processes.
The fact that the camera has only very few buttons makes it easily possible to operate it with only one
hand.
2 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual and particularly of the safety
information. In addition to the local rules at your workplace, the following safety notes must be observed
at any time.
- The device may only be used in approved temperature range. Do not make any measurements if the
ambient temperature is higher than the one stated in the specifications.
- Avoid exposure to extreme radiation, e. g. from sunlight, carbon dioxide lasers or arc welders.
- Protect the device from dust and water. If you work in an environment which is close to water, make
sure that the device is also protected from splashing water.
- The case must only be opened by qualified personnel of PCE Instruments. Otherwise, the warranty will
become void.
- The instrument should never be placed with the user interface facing an object (e.g. keyboard side on a
table).
- You should not make any technical changes to the device.
- The non-optical parts of the camera should be cleaned with a soft cloth which has been dipped into
water. The optical parts should only be cleaned if they are visibly dirty. Use a lens cleaning cloth.
- Always hold the camera tightly when using it.
- Whenever you do not wish to use the camera or want to transport it, ensure that it is in the carrying bag
designed for this purpose.
- Always make sure that the holes in the infrared camera are open and not blocked by any foreign
objects.
- Do not switch the camera back on within 15 seconds after switching it off.
- Do not expose the camera to impact, shock or strong vibration as this can cause damage to the camera
or parts of the camera.
- Only use the SD card with the infrared camera.
- Never attempt to disassemble or open the rechargeable battery and never expose it to fire or high
temperatures.
- Do not short-circuit the battery.
- Keep the battery away from water or moisture.
- For charging, only use the accessories you received along with this product.
- Do not touch the lens with your fingers.
This manual is published by PCE Instruments without any guarantee.
We expressly refer to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
Manual
3