Chapter 2
Mainboard Installation
To install this mainboard into your system, follow the procedures
in this chapter:
q
Identify the mainboard components
q
Install the correct processor
q
Install one or more memory modules
Verify that any jumpers or switches are at the correct setting
q
q
Install the mainboard in the system chassis
Install any extension brackets or cables to the mainboard
q
headers
q
Install any other devices and make the appropriate connections
to the mainboard headers.
Note: 1. Before installing the mainboard, you must ensure that
jumper J9 is set to the Normal setting. See this chapter for
information on locating J9 and changing the jumper setting.
2. While installing the mainboard, please make sure the AC
power cord is unplugged before the full system is installed
completely. Otherwise, it may destroy stuffs unpredictably, due to
the power-on trigger event of power management.