Gazelle GZ1700 Operator's Manual
  1. Manuals
  2. Brands
  3. Gazelle Manuals
  4. Floor Machine
  5. GZ1700
  6. Operator's manual

Gazelle GZ1700 Operator's Manual

Electric in-line burnisher
Hide thumbs
Table of Contents

Advertisement

Quick Links

O p e r a t o r ' s M a n u a l
Electric In-Line Burnisher
GZ1700
GZ1700C
GZ1720E
GZ2000
For Models:
GZ2000C
GZ2020E
GZ2020K
Failure to read and understand this manual
before operating this machine or performing service on
this machine may result in injury to the operator or
nearby personnel or result in damage to the machine
or nearby property. Each operator must be trained in
the operation of this machine before being allowed to
use it. Contact Amano Pioneer Eclipse Customer
Service at 1-800-367-3550 or 1-336-372-8080 or an
authorized Amano Pioneer Eclipse Distributor to
inquire about training or to request a replacement
manual.
La falta de leer y de entender este manual antes de
usar esta máquina o de realizar servicio en esta
máquina puede dar lugar a lesión al operador o al
personal próximo o a resultado en daño a la máquina
o propiedad próxima. Cada operador debe ser
entrenado en la operación de esta máquina antes de
ser permitido utilizarla. Ponerse en contacto con el
servicio de Amano Pioneer Eclipse 1-800-367-3550 o
1-336-372-8080 o un distribuidor autorizado por
Amano Pioneer Eclipse para investigar sobre el
entrenamiento o para solicitar un manual.
Manquer de lire et de comprendre ce manuel
d'utilisation avant l'utilisation de cette machine ou
avant faire de maintenance sur la machine peut être
résulter en blessure à l'opérateur ou au personnel
proche ou peut endommagé la machine ou la propriété
proche. Chaque utilisateur doit être entraîné dans
l'opération de cette polisseuse avant l'utilisation.
Veuillez contacter le service àpres-vente de Amano
Pioneer Eclipse à 1-800-367-3550 ou 1-336-372-8080
et/ou un distributeur de Amano Pioneer Eclipse pour
vous renseigner concernant l'entraînement ou pour
obtenir un autre manuel d'utilisation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GZ1700 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gazelle GZ1700

  • Page 1 O p e r a t o r ’ s M a n u a l Electric In-Line Burnisher For Models: GZ1700 GZ2000C GZ1700C GZ2020E GZ1720E GZ2020K GZ2000 Failure to read and understand this manual before operating this machine or performing service on...
  • Page 2 Record This Important Information Date of Purchase Purchased From Address City State Phone Contact Machine Model Machine Serial Number Important Phone Numbers Medical Emergency Police Fire Department...

  • Page 3: Specifications

    Specifications Performance: Length: GZ1700, GZ1700C, GZ1720E: 12,750 sq ft/hr GZ1700, GZ1700C, GZ1720E: 29.0 in (73,7 cm) (1,170 m GZ2000, GZ2000C, GZ2020E, GZ2020K: GZ2000, GZ2000C, GZ2020E, GZ2020K: 33.5 in (85,0 cm) 15,000 sq ft/hr (1,380 m Height: Motor: 46 in (116,8 cm)

  • Page 4: Table Of Contents

    Machine Diagram ............9 Wiring Diagram: GZ1700, GZ1700C, GZ2000, GZ2000C ......10 Wiring Diagram, GZ1720E, GZ2020E, GZ2020K .

  • Page 6: Preparing And Operating The Gazelle

    3. Lay the unit on the floor (Figure 6). 4. The Gazelle is equipped with a folding handle and is packaged with the handle in the folded position (Figure 1). Unfold the handle by lifting it to the upright position and latching (Figure 2).

  • Page 7: Removing The Pad

    Use only the extension cord supplied with the burnisher. Do not use more than one extension cord. The total length of the extension cord should not exceed 50 feet (GZ1700, GZ2000, GZ1700C, GZ2000C) or 25 meters (GZ1720E, GZ2020E, Figure 13 GZ1720K).

  • Page 8: Adjusting The Pad Pressure

    NOTE: When using a new buff pad, always start the Gazelle electric burnisher in the low pad pressure position and run the machine on low pad pressure for about 2 minutes. This allows the pad to break in properly and helps prevent harming the finish.

  • Page 9: Resetting The Circuit Breaker

    Cross-section of box with Gazelle packed for shipping. (Figure 29). 2. Disconnect the power cord from the outlet.

  • Page 10: Safety Guidelines

    DO NOT operate without sufficient cord “slack” or allow cord to pull out of wall socket. Tugging on the cord • Models GZ1700 and GZ2000 are for use on a will cause wires to pull loose and pose an electrical AC110V, 60HZ circuit only. Gazelle models shock hazard.

  • Page 11: Machine Care

    Machine Care Cleaning the Machine Replacing the Dust Skirt • When cleaning or maintaining the unit, 1. Disconnect the power cord from the electrical disconnect the power cord from the power outlet. source. 2. Place the handle in its upright position so that the •...

  • Page 12: Troubleshooting

    Troubleshooting When trouble occurs during use: Before requesting repair service, carefully read the trouble-shooting checkpoints contained in this manual. If you are unable to repair the unit yourself, call your Amano Pioneer Eclipse Distributor or Service Center. To ensure sustained, high-quality performance, use Amano Pioneer Eclipse replacement parts.
  • Page 13 This page intentionally left blank.

  • Page 14: Machine Drawings And Parts Lists

    Machine Drawings and Parts Lists Machine Diagram Operating Handle Grips Safety Lever Attach Power Cord Motor cover Circuit Breaker Cord Holder Handle Bumper Dust skirt pressure adjustment Operating lever wheels Dust bag Transport wheels Handle release lever...

  • Page 15: Wiring Diagram: Gz1700, Gz1700C, Gz2000, Gz2000C

    Wiring Diagram: GZ1700, GZ1700C, GZ2000, GZ2000C 012507...

  • Page 16: Wiring Diagram, Gz1720E, Gz2020E, Gz2020K

    Wiring Diagram: GZ1720E, GZ2020E, GZ2020K 012507...

  • Page 17: Belt Drive And Dust Collection

    Belt Drive and Dust Collection: Gazelle 012507...
  • Page 18 Belt Drive and Dust Collection: Gazelle MODELS PART # DESCRIPTION GZ1700, GZ1720E, GZ1700C SA011800 Frame, Gazelle, 17, Poly-v with Inserts GZ2000, GZ2020E, GZ2000C, GZ2020K SA011900 Frame, Gazelle, 20, Poly-v with Inserts MP092300 Plate, Spindle, Poly-v, 3.00”, Assembly NB019100 Bolt, Hex, 1/4-20 x 3/4, Grade 5...
  • Page 19 Belt Drive and Dust Collection: Gazelle 020402...
  • Page 20 Belt Drive and Dust Collection: Gazelle Continued from previous pages MODELS PART # DESCRIPTION GZ008300 Diode, 400VDC, 5 Amp, Quick Connect NB19500 Screw, BH, 10-24 x 3/4” MP087600 Retainer, Seal, Felt GZ1700, GZ1700C, GZ2000, GZ2000C NB021600 Clamp, Retainer, Nylon GZ1720E, GZ2020E, GZ2020K...

  • Page 21: Handle And Motor Cover

    Handle and Motor Cover: Gazelle 100903...
  • Page 22 Handle and Motor Cover: Gazelle REF MODELS PART # DESCRIPTION GZ1700, GZ1720E, GZ1700C SA011800 Frame, Gazelle, 17, Poly-v with Inserts GZ2000, GZ2020E, GZ2000C, GZ2020K SA011900 Frame, Gazelle, 20, Poly-v with Inserts MP091900 Bracket, Tensioner, Belt, Poly-v NB019800 Bolt, Hex, Tap, 5/16-18 x 2, Grade 5...
  • Page 23 Handle and Motor Cover: Gazelle 100903...
  • Page 24 Handle and Motor Cover: Gazelle Continued from previous pages MODELS PART # DESCRIPTION XL4610 Cover, Switchbox, Interlock MX1080 Washer, Flat 3/8 MP087100 Lever, Switchbox MP063800 Base, Interlock MP064000 Lock, Switchbox, Interlock MP063700 Plunger, Switchbox, Interlock NB019300 Screw, Phillips, 6-32 x 5/8, Flat, C/S...

  • Page 25: Limited Warranty

    Limited Warranty Gazelle Electric Burnishers To Qualify for this warranty: 1) Machine must be registered at the time of purchase on a form provided by Amano Pioneer Eclipse Corporation. Your Amano Pioneer Eclipse Distributor is responsible for the registration of your machine. Please cooperate with your distributor in supplying necessary information on the card.
  • Page 26 © 2000 Amano Pioneer Eclipse Corporation P.O. Box 909 Sparta, NC 28675 1-336-372-8080 1-800-367-3550 www.pioneer-eclipse.com Article #: Serial #: DOM: Built in NC, USA...

This manual is also suitable for:

Gz1700cGz1720eGz2000cGz2000Gz2020eGz2020k

Table of Contents