Using The On-Screen Display; Using Your Remote Control With The Osd - Dell W2600 Owner's Manual

Using the On-Screen Display

Your TV has an on-screen display (OSD) that allows you to select the proper input source, make
adjustments to the image and audio settings, select to view Picture-In-Picture, Picture-Outside-
Picture, and Picture-By-Picture, and set parental controls. The OSD also allows you to chose how to
view the images when using the card reader and to make adjustments to the image if you are using
the TV as your computer monitor.

Using Your Remote Control With the OSD

NOTE:
You can access and make selections to the OSD using the volume and channel buttons on the
side panel of the TV or the remote control. Except where noted, this section describes how to use the
OSD with the remote control.
1
To enter the OSD, press the Menu button.
10 icons appear along the bottom of the screen.
MAIN MENU
EXIT
PICTURE AUDIO
INPUT
SELECT
2
Use the left and right buttons (volume buttons) to move between the icons.
The icon appears highlighted as you move through the menu.
3
To select an option, push the Enter button when the icon is highlighted.
4
In the option menu, use the up and down (channel) buttons to move through the various
settings.
NOTE:
A red arrow appears next to the setting as you navigate through the options. A check mark
appears next to the option that is selected.
SIZE
PIP/POP PARENTAL
CONTROL
PBP
CLOSED
SLEEP SETUP
CAPTION
TIMER
Using the On-Screen Display
25