Table of Contents
Advertisement
EDITING AND MENU CONFIGURATION
The Menu Control, Display and Edit Control functions operate in harmony
allowing complete control of receiver operations. Refer Figure 5-1, Table 5-2
and Figure 5-2 for an illustration and description of the numerically
referenced Menu Control buttons below.
TO EDIT MENU INFORMATION:
Press any Menu Control button (3); the menu display screen (5)
1.
presents the corresponding field labels.
Rotate the Edit knob (6) to move the cursor under the field label you
2.
wish to edit.
To enable the Edit function, press the Edit knob once; the word
3.
EDIT, located above the Edit knob, becomes illuminated.
Rotate the Edit knob to change the data for that particular field.
4.
Once the desired setting is displayed, press the Edit knob to exit the
5.
editing mode; the lit word EDIT is extinguished.
The Save button (3l) is now illuminated.
6.
To save the new setting to the receiver database, press the Save
7.
button. If the save button is not pressed within 10 seconds, the
receiver will automatically press it for you and save the current
settings.
NAVIGATING THE MENU DISPLAY
The Front Panel Menu Controls display a series of push buttons that you can
use to configure and control your system. So you can always identify what you
are looking at, the word above the active button is lighted. The names of the
fields available in that menu are displayed on the screen located at the right
side of the front panel. Below each field label is the current setting for that
field.
Note: Within the LCD screen diagram, 0 is used as a placeholder for
numeric characters and – is used as a placeholder for alpha characters.
DSR-4810 Operating Manual, Rev. B (4/09/00)
Front Panel Controls and Menu Display
12
Advertisement
Table of Contents
