Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for E-Bench KH 2024
Summary of Contents for E-Bench KH 2024
- Page 1 KH 2024...
- Page 4 Operating instructions Page 5 - 14...
-
Page 6: General Description
1. General description – Electronic digital radio receiver – Power supply: 6.0V DC (Direct Current) from batteries (4 x AA, LR6 1.5V, not supplied) or from an external adapter 6.0-7.5V AC – Precision quartz operation – User-friendly operation using interactive LCD display –... - Page 7 1.1 Features Telescopic aerial for FM and SW reception Button lock Alarm /wake-up setting 1 button Snooze / radio OFF button Sleep Timer / radio OFF button Alarm /wake-up setting 2 button Station preset save button Setting buttons »Up« / »Down« »Mem.
-
Page 8: Operation
Warning: Even when using an external adapter, you should always have four UM3 batteries in the battery compartment as a back-up in case of mains power failure. Protect the equipment from moisture. Never put it on a wet surface. 2. Operation •... -
Page 9: Setting The Clock
one after the other. • At one minute intervals, the actual time is checked with the alarm setting if this is activated. (for details see Section 2.8 "Activated alarm setting"). 2.2 Setting the clock • Press »MODE« once if the device is in time display mode. -
Page 10: Setting The Local Time
2.4 Setting the local time • Press »MODE« three times if the device is in time display mode. • Press »MODE« four times if the device is in radio mode. • If the device is already in "Date entry" mode as described in Section 2.3, you can enter "Setting the local time"... -
Page 11: Sleep Timer
made, then the current settings are activated and the device goes back into automatic operation. 2.5 Checking the world time • Press »MODE« four times if the device is in time display mode. • Press »MODE« five times if the device is in radio mode. - Page 12 LCD display. • The current setting HH.MM (hours:minutes) and the day of the week display start to flash. • Use »UP« to adjust the setting in increments of 1 minute. • Use »DOWN« to adjust the setting in decrements of 1 minute.
-
Page 13: Selecting Radio Presets
2.9 Selecting radio presets • There are 10 presets for each radio band. • Each button can have two presets. In order to call up the other preset, just press the button a second time. • If the radio is switched on, press the station presets 1/6. The display shows 'MEM' steadily, the frequency of preset 1 appears steadily on the LCD and '1' appears steadily on the 'MEM display. -
Page 14: Display Mode
• Table of frequency bands and steps for each band. : Band Frequency range Frequency steps 87.5 - 108.5 MHz 50 kHz 5.85 -15.6 MHz 530 -1656 kHz 144 - 281 kHz 2.12 Tuning short wave (SW) Set the slide switch to LX if the reception of the station is strong enough. -
Page 15: Button Lock
• Press »ALT. DISP.« to show all the selection options. If no further button is pressed for 3 seconds, the normal display is automatically activated. • If the radio is switched on and in frequency display mode, only the frequency of the station being received is displayed irrespective of the display type selected in the display mode. -
Page 16: Statement Of Conformity
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations: EC low voltage regulations, Electromagnetic compatibility, Applicable harmonised standards. Type/Description: Digital world radio receiver KH 2024 Bochum, 31.01.2003 Hans Kompernaß - Managing Director -... - Page 18 © graphic design, photos and translations by ORFGEN · Essen / Germany...