INCLUDED PARTS 1) Hopper Assembly including Lid (2 Pieces) Poly Bucket Lid Poly Bucket 2) Directional Power Control Unit - assembly and programming instructions for this unit are contained within its box (1 piece) REQUIRED TOOLS 1) 8MM Nut driver 2) Pliers 3) Cordless or Electric Drill (if necessary)
Page 3
ASSEMBLY INSTRUCTIONS Verify the contents of the package against the included parts list. If you are missing any parts from the list, please contact BA Products immediately at the toll-free number provided. First, remove the lid. Second, remove the directional lower unit box.
To insure proper functionality and a long life, BA Products strongly recommends that you service your feeder at least once every year. The Model #ADF-25DX should have the hopper thoroughly cleaned out at least once a year. Some feed/seed types have the tendency to cake and...
BA Products is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the BA Products’ feeder system. Never lean a ladder against the feeder when filling. You must always use an alternative method to fill your feeder.
Page 6
BA Products strives to provide you with the highest quality, best value feeder products available any- where. We feel that you will come to depend on and enjoy our new AquaPro series poly feeders. ® Thank you for your Purchase! PAgE 6...