Advertisement
Quick Links
STV-20
Operator's
STV-20D
Manual
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your ALTO
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If you
cannot read English, have this manual explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator's position at the rear of the machine.
For new books write to: ALTO U. S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
Form No. 78439A 12/98
CLARKE TECHNOLOGY
Printed in the U.S.A.
Advertisement
Related Manuals for Clarke Alto STV-20D
Summary of Contents for Clarke Alto STV-20D
- Page 1 All directions given in this book are as seen from the operator’s position at the rear of the machine. For new books write to: ALTO U. S. Inc., 2100 Highway 265, Springdale, Arkansas 72764. Form No. 78439A 12/98 CLARKE TECHNOLOGY Printed in the U.S.A.
- Page 2 STV-20 Dual Motor Head Assembly ..........7 Filter Bag and Float Assembly............. 8 Wet Vac Tools Parts List ............. 8 Tank Assembly & Tilt & Pour Carriage Assembly......9 Squeegee Tool and Floor Brush Tool Parts List ......10 Page -2- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
-
Page 3: Operator Safety Instructions
Do not operate this machine until it is completely assembled. Inspect the machine carefully before operation. Use only as de- scribed in this manual. Use only Clarke's recommended attachments. DANGER: Machines can cause an explosion when operated near flammable materials and vapors. - Page 4 Do not cut, remove or break the ground pin. If the outlet does not fit the plug, consult your electrical contractor. WARNING: Have worn, cut or damaged cords and plugs replaced by an autho- rized service person. Page -4- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 5 Empty the vacuum tank. Shake the filter bag to remove dust. In a few minutes the thermal overload will allow restarting of the motor. Page -5- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 6 Gasket, Vac Motor 57163A Plug, Motor 54058A Foam, Triangle 54059A Filter 57164A Plug, Lower 50760A Base, Motor 59859A Washer, Star 56485A Screw, 4mm x 8mm 59887A Wire, Connect 52944A Clip NI= Not Illustrated Page -6- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 7 57163A Plug, Motor 54058A Foam, Triangle 54059A Filter 59770A Valve, Auto 57164A Plug, Lower 50760A Base, Motor 59859A Washer, Star 56485A Screw, 4mm x 8mm 59887A Wire, Connect 52944A Clip NI= Not Illustrated Page -7- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 8 Wet Vac Tools Part No. Description 59213B Tool, Squeegee 59214B Tool, Floor Brush 59215A Tool, Crevice 38mm 57503A Reducer, Wand 59860A Wand, Extenion 2 Pc. 59861A Wand, Chrome 2 Pc 54887A Hose, 38mm, 2.5m Page -8- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 9 Screw, 5mm x 30mm 57853A Ring, Snap 87055A Washer 56441A Screw, 5mm x 20mm 50554A Body, Hinge 50555A Block, Stirrup 55008A Hinge, Locking 56481A Screw, 5mm x 30mm 55534A Knob, Hinge 52120A Caster, Swivel Page -9- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 10 CLARKE TECHNOLOGY STV-20 and STV-20D Squeegee Tool Drawing & Parts List 1/98 Squeegee Tool - 59213B Ref. Part No. Qty Description 50753A Body, Tool 57873A Ring, Floor Tool 50357A Adapter, Floor Tool 53096A Support, Floor Tool 88001A Screw, 5mm x 15mm 59970A Wheel &...
- Page 11 S-431 04 Molndal Customer Service Headquarters and Factory +46 31 706 73 00 2100 Highway 265 Springdale, Arkansas 72764 ALTO Norge A/S, Oslo (Norway) (501) 750-1000 Bjornerudveien 24 N-1266 Technical Service +47 2275 1770 1-800-356-7274 Page -11- CLARKE TECHNOLOGY Operator's Manual STV-20/20D...
- Page 12 (c). Clarke will repair the product and/or replace any defective parts without charge within a reasonable time after receipt of the product. Clarke's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
Need help?
Do you have a question about the Alto STV-20D and is the answer not in the manual?
Questions and answers