Advertisement
OPERATION
Never try to look directly into the laser beam!
Use for your device:
• Laser pointer may be used as an optical ruler when you need to determine cutting line or plane (wheel
saw blade machines).
• Or it may be used as a pointer to easily distribute various objects around defined area (pictures, windows,
tiles etc.).
• Or as position indicator
Switching your device on.
• Right after you switch your machine on, the pointer starts emit laser beam.
• Before switching the device on, make sure that is pointing at the desired direction to prevent eye damage.
• Set the stand to required position and aim the laser at the desired direction.
• Press the red button on the rear side of the laser pointer (the button remains depressed) to switch you
device on.
Switching your device off.
• Press the red button again and it will pop out. The device is now switched off.
Setting the orientation of the laser cross
• You may set the position of the laser cross by turning the end part of the pointer. Hold the pointer with
one hand and turn the end piece with other hand.
MAINTENANCE
Cleaning the laser lens
• Make sure no dust or humidity may get in contact with the lens.
• If you have to clean the lens, use only very soft and clean cloth or cotton-wool pad.
• Keep your machine/tools clean. Dirt from tools may enter the inner machine mechanism and cause
damages to the tools or machine.
• Do not use aggressive cleaning solution or paint thinners to clean your tool/machine.
• Clean plastic parts with soft cloth dipped in soapy water.
Detailed description of the use of this device is not included in this manual, because the manufacturer /
distributor assumes that the user is experienced in similar type of work. Also according to the applicable
law, this device is considered as a commonly sold and used tool. If the user is unfamiliar with the use of
this device, we recommend finding out more information about using this device at the Department of
work safety.
6
SAFETY PRECAUTIONS
• This device may be used by a qualified person, 18 years or older who has been
trained in work and environmental safety procedures.
• Any person using this equipment must possess a medical certificate
demonstrating his eligibility to operate this equipment.
We recommend placing warning labels on conspicuous places around your workplace:
•
"Prevent most common injuries" - LASER PRODUCTS
Symbols used in this manual
Warning!
This symbol informs you about the risk of personal injury or damage to the machine
or materials.
Warning!
Danger of damage.
Note:
Additional information.
Laser product. Risk of eye injuries
General instructions
• Plastic bags and packaging materials pose danger for small children and animals.
• Make sure you know your tool or machine and you are familiar with its operating procedure. Know the
hazards if not used correctly.
• Person using this machine must be properly trained and must know how to safely operate this equipment.
He must be also aware of the hazards and risks that may occur if not used correctly.
• Pay special attention to safety notes and safety labels. Do not remove or damage them.
If the warning label becomes unreadable or damaged please, contact your vendor.
• Maintain your working area clean. Disorganized and dirty working area may cause accidents.
• Never work in tight spaces or in purely lit rooms. Make sure the floor is solid and stable and that you can
move around easily. Maintain stable posture during work.
• Stay focused and use all your senses. Pay attention to the working procedure. Do not continue to work if
you cannot pay attention.
• Maintain your tools clean.
• Handles must be kept free of grease and dirt.
• Make sure no children, unauthorized persons or animals have access to your workshop.
3
Advertisement
