Summary of Contents for floorex Beaver 250
- Page 1 Effective Date 11-11-10 Beaver 250 Safety and Operators Manual & Parts Listing 25-05-11 CAUTION: Read the instruction manual before using the appliance.
-
Page 2: Notes
Beaver 250 Notes Machine Purchased: Owner: 1800 356 673 1800 - FLOOREX... -
Page 3: Table Of Contents
Beaver 250 Table of Contents Notes Specifications Safety instructions Safety instructions Electrical safety Operating instructions Operating instructions Operating instructions Floor Take-up Procedure. Floor Take-up Procedure. Problem solving Parts Diagram Main Parts List Main Parts Diagram Handle Parts List Handle Wiring Diagram This machine is designed to operate with the wheels in contact with the floor at all times. -
Page 4: Specifications
Beaver 250 Specifications Beaver 250 Weight 91kg Dimensions 524 x 858 x 1114 (width x Height x Length) Rated Voltage 240 Volt 50 Hz Rated Watts 1500W Max Blade Width 250mm 1800 356 673 1800 - FLOOREX... -
Page 5: Safety Instructions
Beaver 250 Safety instructions Read and understand the instructions on the machine and in this manual and engine manual (if applicable). Different models may have different parts and controls. Equipment should only be operated by trained personnel, in good physical condition and mental health (not fatigued). The operator and maintenance personnel must physically be able to handle the bulk weight and power of this machine. -
Page 6: Safety Instructions
Beaver 250 Safety instructions Do not modify machine in any way. Only use genuine BEAVER 250 parts and accessories. Repairs should be performed by qualified persons only. Ensure parts have stopped moving and disconnect power or spark plug when servicing or changing blades or accessories. -
Page 7: Electrical Safety
WARNING - The BEAVER 250 has an overload switch and it will trip when under excessive load and will not allow the machine to be switched on if it is overloaded. (Overload will need to be reset and only will allow it when safe to do so). -
Page 8: Operating Instructions
If so, take necessary action to eliminate the hazard. Disconnect the power lead from the Beaver 250 before changing blades or accessories. Failure to comply could result in bodily injury. Fold handle to the operating mode (see operating mode on following page) and lock in place using the locking levers, then tilt machine back so handle is resting on the floor. -
Page 9: Operating Instructions
Beaver 250 Operating instructions FLOOREX- 1800 1800 356 673... -
Page 10: Operating Instructions
Beaver 250 Operating instructions The beaver 250 has axle height adjustment to adjust the angle of attack. Set the axle height at the lowest position before each job and move up only if the machine repeatedly rises over the material being removed. -
Page 11: Floor Take-Up Procedure
Beaver 250 Floor Take-up Procedure. 1. Create strip to start from across the room 2. Working From the starting strip remove strips leaving 100- 150mm of material between each strip 3. Work the other side of the starting strip to the other end of the room. -
Page 12: Floor Take-Up Procedure
Beaver 250 Floor Take-up Procedure. 1. Use a full width blade to remove the remaining material 1800 356 673 1800 - FLOOREX... -
Page 13: Problem Solving
Beaver 250 onto a small material in one pass material on the floor after area making removal each strip. Come back and easier. -
Page 14: Parts Diagram Main
Beaver 250 Parts Diagram Main 1800 356 673 1800 - FLOOREX... -
Page 15: Parts List Main
Beaver 250 Parts List Main FLOOREX- 1800 1800 356 673... -
Page 16: Parts Diagram Handle
Beaver 250 Parts Diagram Handle 1800 356 673 1800 - FLOOREX... -
Page 17: Parts List Handle
Beaver 250 Parts List Handle FLOOREX- 1800 1800 356 673... -
Page 18: Wiring Diagram
Beaver 250 Wiring Diagram (When Fitted) 1800 356 673 1800 - FLOOREX... - Page 19 Beaver 250 Floorex Products Your complete supplier of all your concrete surface preparation needs Diamond grinders Dust extraction Shotblasters Screed mixers Diamonds Coating application Floor Scrapers FLOOREX PRODUCTS 156 Gray Street Swan Hill VIC. 3585 Web: www.floorex.com.au Email: sales@floorex.com.au FLOOREX- 1800...
Need help?
Do you have a question about the Beaver 250 and is the answer not in the manual?
Questions and answers