Intended Use; Delivery Items / Appliance Description; Technical Data; Functions Of The Foot Spa - Balance Bubbling Footbath KH 5557 Operating Instructions Manual

Intended Use

This foot spa is intended for personal, home use. Its
function is only to bathe and massage the feet. It is
not suitable for any other purpose. It is not intended
for use in the medical/ therapeutic or commercial
fields.
Delivery Items /
Appliance Description
Function switch
Cover
Recesses for accessories: foot pad
Recesses for massage accessories
Water drainage
Roller massager
Accupressure massager
Finger massager
2 Accupressure accessories
2 Roller massage accessories
Operating instructions

Technical data

Rated voltage:......................220 - 240 V ~ 50Hz
Rated output:..................................................85 W
CO Time: ....................................................20 min.
Protection class:................................................II
CO Time
The CO Time (Continuous Operation Time) details
how long an appliance can be operated without
the motor overheat-ing and becoming damaged. Af-
ter the appliance has run for this period it must be
switched off until the motor has cooled itself down.

Functions of the Foot Spa

This foot spa has three functions available which
can be used in various combinations:
1. Bubbles: Air emerging from the air-jets provides
the formation of air bubbles, which massage the
feet pleasently and gently.
2. Heat: The foot pad heats itself and thus provides
for a constant water temperature.
3. Massage: The foot accessories with massage
nubs create through vibration a pleasant massage
effect.

Operation

Setup
Place the foot spa on the floor in front of a chair.
Set the function switch
Insert the accessories for the foot
pads
Select the accessories for the foot pad:
- Accupressure accessories with nubs
gentle vibration massage
- Roller massage accessories
point massage of the soles
Place the accessories in the recesses provided
for them in the foot pad. The accessories for
the recesses
and „R" for right on their reverse side.
- 3 -
to 0 (OFF).
for an additional
bear the markings „L" for left
for a