Odyssey 7Q User Manual
  1. Manuals
  2. Brands
  3. Odyssey Manuals
  4. Recording Equipment
  5. 7Q
  6. User manual

Odyssey 7Q User Manual

Hide thumbs Also See for 7Q:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

See also: User Manual , Setup Manual
4K Apple ProRes
4096x2160 / 24p
3840x2160 / 23.98,25,29.97
HD Apple ProRes 422(HQ)
1080p23.98,24,25,29.97,50*,60*
720p50/60
*only supported on 7Q+
GH4
SETUP GUIDE
Updated January 28, 2015 | Firmware Release v4.10.100
Odyssey7Q+
Odyssey7Q

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7Q and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Odyssey 7Q

Summary of Contents for Odyssey 7Q

  • Page 1 SETUP GUIDE Odyssey7Q+ Odyssey7Q 4K Apple ProRes 4096x2160 / 24p 3840x2160 / 23.98,25,29.97 HD Apple ProRes 422(HQ) 1080p23.98,24,25,29.97,50*,60* 720p50/60 *only supported on 7Q+ Updated January 28, 2015 | Firmware Release v4.10.100...
  • Page 2 HD Apple ProRes 422 (HQ) recorded as Apple ProRes 422 (HQ) compressed HD video .MOV FRAME RATE SUPPORT The following rame rates are supported on the Odyssey from the GH4 • 4K 23.98-30 Odyssey7: Not supported. Odyssey7Q: YAGH SDI Outputs 1-4 Odyssey7Q+: YAGH SDI Outputs 1-4 or HDMI •...
  • Page 3 * Note when set to 4:2:2 10 bit, the camera will not record internally **When wish to record 4K you must first plug a 4K rated HDMI cable into the odyssey to get the 4K output menu, and ensure 4K Down Convert is OFF.
  • Page 4 Connect the HDMI output from the YAGH to the HDMI input of the Odyssey. VIA SDI Connect each of the four BNC outputs on the YAGH to the SDI ports on the Odyssey SDI OUT 1 » SDI A IN SDI OUT 2 »...
  • Page 5 (4) » HDMI REC OUTPUT » BIT MODE » (4:2:2 10-BIT*/4:2:2 8-BIT) * Note when set to 4:2:2 10 bit, the camera will not record internally **When wish to record 4K you must first plug into the odyssey to get the 4K output menu, and ensure 4K Down Convert is OFF.
  • Page 6 Note: HDMI/SDI Timecode requires GH4 firmware version 2.1 or higher. ☼ » SETUP » TIMECODE SOURCE » SDI/HDMI The HDMI input is automatically detected when connected to the Odyssey. ** Note the HDMI input is on the right side of the unit, on the Odyssey7Q+ but is at the bottom of the unit for Odyssey7 and 7Q.
  • Page 7 6. SET HDMI CADENCE Connect HDMI input, and verify the camera internal record rate matches the input indicator on the Odyssey. If it does not a Cadence may be needed to correctly reflect the format in which you wish to record.

  • Page 8: Off-Loading Data

    OFF-LOADING DATA COPYING FILES TO YOUR COMPUTER 1. CONNECT SSD DRIVE TO ADAPTER Connect the Convergent Design 2.5” Premium SSD Media to any off-the-shelf 2.5” SATA adaptor (example: Seagate GoFlex Thunderbolt Adaptor or USB 3.0 Adaptor) 2. CONNECT ADAPTER TO COMPUTER The SSD will mount within 10-20 Seconds.

  • Page 9: Post Production

    POST PRODUCTION Apple ProRes 422 (HQ) The Odyssey 7 and 7Q records in Apple ProRes HQ which is a 10 bit 4:2:2 220Mb compressed codec. This will allow for high quality recording while avoiding high data rates of working with uncompressed video.

Table of Contents