Safety Measures - Lec+ IST 47 Operating Instructions Manual

GB/IE

Safety Measures

Before you turn the refrigerator on.
* When placing, moving or lifting the refrigerator, do not hold the door handle, do not pull
the condenser at the back of the refrigerator, and do not touch the compressor unit.
* After placing the refrigerator, wait two hours before you turn it on, for it could have
been excessively tilted in transport.
* The producer in not responsible for any damage resultant from violating the principles
in the manual. Thus, read carefully the information on safety measures, operation, and
maintenance of the refrigerator.
* Please keep the manual for future use or for handing it over to the next user.
* Before any maintenance activity, pull the plug out, do not pull the cord but hold firmly
the plug.
* Do not use double-wire extension cords; if an extension cord is necessary, make
sure it is a cord with protection pin and safety certificate.
* If the main power supply cord is damaged, it should be replaced by a service en-
gineer.
* Because of safety reasons, do not repair the appliance by yourself. Repairs carried out
by persons without proper qualifications can cause serious risk of injury for the user.
* Defrosted products, even only partially, should not be frozen again.
* Do not store contents in glass bottles or containers in the freezing chamber. The
bottles and containers could break.
* If the appliance is not to be used any more, make it completely safe prior to scrapping
by cutting the cord.
* Keep the packaging material (bags, Styrofoam pieces, etc.) out of reach of children.
* Should the refrigerating unit be damaged, air the room for a few minutes (the room
should have at least 4 cubic meters).
* Do not damage parts of the cooling sys-
tem, i.e. do not punch pipes with sharp
objects, do not squash, tie the pipes, do
not scratch ice of the surface.
* The agent from the system can cause
eye injury.
* The refrigerator should not be trans-
ported, moved, or placed in horizontal
position and tilted more than 40°. Should
such a situation occur, after placing the
appliance in the right position wait at
least 2 hours before turning it on.
Fig. 1
4