Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for V-Gear LanDisk
Summary of Contents for V-Gear LanDisk
-
Page 2: Table Of Contents
LANDISK Advanced User Guide V1.0 (2005/2/18) 1.Disk Utility.………………………………………….……………………….3 1-1 Set Cluster Unit…………………………………..…………………………………………..………3 1-2 Scandisk……………………………………………..…………………………………….………….4 2. Network Share.…………………………………………………………….4 2-1 SMB Configuration…………………………….…………………………………………………….4 2-2 FTP Configuration……………………………………………………………………………………5 3.System…………………………….………………………………………..8 3-1 Password…………………………………………………………………………………..………….8 3-2 Time Zone………………………………………………………………………………..……………8 3-3 IP Config…………………………………………………………………………………..…………..9 3-4 DHCPS…………………………………………………………………………………………………9 4.Mantenance……..…………………………………………………………12 4-1 Firmware Upload………………….………………………………………………………………….12 4-2 Factory Defaults………………………………………………………………………………………13... -
Page 3: Disk Utility
Set Cluster Unit: NOTE: LANDISK needs HDD with UltraDMA supported. *HDD Above 20GB has supported UltraDMA generally; if the HDD is under 20GB, please check if it has UltraDMA supported. *Each file size is 4GB limited due to FAT32 format. -
Page 4: Scandisk
Scandisk Here you can check if there is error on your HDD, press “Start” and the dialog Box will show as below, press OK to start the HD checking. 2. Network Share 2-1 SMB Configuration Hostname 以及 以及 Group name 以及... -
Page 5: Ftp Configuration
2-2 FTP Configurations Here you can set FTP functions, status and user’s authority, please check the image below. - Page 6 If you allow anonymous login, and the authority after anonymous login, Home Directory is the folder will be access by anonymous login. FTP Acoount List Presses “ Add/Modify “ to set the accounts that you allow accessing LANDISK, and defining the authority.
- Page 7 After “Add/Modify”, you will see the accounts list as below, RO=Read Only, RW= Read and Write, and you can also use “En/Disable” to control certain account to access FTP.
-
Page 8: System
3.System Here you can set the administrator password, Time zone, IP configuration, DHCP service. 3-1 Password ID, Password setting for administrator. 3-2 Time Zone Check Enable or Disable to define if you like to use SNTP (Simple Network Time Protocol) Time Server: Define NTP server. -
Page 9: Ip Config
NOTE: The Hub or Router you connect with LANDISK must has DHCP service If you choose “Automatic IP”, if your device has no DHCP service, the default IP will be “169.254.0.1”, the device which was in that IP address will become “169.254.0.2”... - Page 10 3-4 DHCPS LANDISK has built in DHCP service. You can start the DHCP service here and LANDISK will turn it self into a DHCP server. DHCP Server Configuration Set the DHCP configuration as below: NOTE: If the Hub or Router connected to LANDISK has DHCP, the LANDISK will prevent the setting.
- Page 11 If you want to point a certain IP address for certain MAC address (Fixed mapping), please press “Fix Mapping Table” to set up as below: NOTE: Fixed mapping will be functional only when the DHCP service was provided by LANDISK it self.
-
Page 12: Mantenance
4.Mantenance 4-1 Firmware Upload Here you can update the new firmware for your LANDISK, please follow the steps below: 1. Choose the “Firmware***.bin” to update 2. Press “Upload”, the dialog will show the warning message as below. Press “OK” to proceed. -
Page 13: Factory Defaults
5.FAQ Does LANDISK have any Power saving function? Yes, if there is no R/W in 15 minutes, LANDISK will spin down the HDD to protect and save power. How does the DHCP service of LANDISK work? If LANDISK has been located in the network environment, which has no DHCP server, LANDISK will turn it self into a DHCP server, the LANDISK will detect if there has any DHCP server existing, if yes, the LANDISK will prevent the DHCP service, and becomes a DHCP client.