Changing Bulbs; Cleaning; Maintenance; Disposal - Kompernass KH 4164 Operating Instructions Manual

Changing bulbs

CAUTION!
Check to ensure that the power plug is remo-
ved from the wall socket. If the lamp has been
in use, first allow it to cool down completely.
This avoids the potential risk of being burnt.
• Place the suction disc
defective bulb and press it firmly.
Turn the bulb through an anti-clockwise quarter-
turn and remove it from the bulb holder.
• Now place the suction disc
of the replacement bulb and press it firmly.
Guide the bulb into the bulb holder and secure
it by turning it through a quarter-turn in a clock-
wise direction.
Attention!
Do not forget to remove the suction disc! Do
NOT operate the lamp with the suction disc
fitted – it would be melted immediately by the
heat.

Cleaning

CAUTION!
Check to ensure that the power plug is removed
from the wall socket. If the lamp has been in
use, first allow it to cool down completely.
This avoids the potential risk of being burnt.
• Clean the appliance only with a dry or lightly
moistened cloth. Do not use abrasive cleaners
or detergents, these could damage the surfaces.
onto the front of the
r
onto the front
r

Maintenance

Attention!
NEVER open any components of the lamp!
Arrange for the appliance to be repaired by
specialists only.
The appliance is maintenance-free. No form of main-
tenance, either on or in the appliance, is intended
for execution by the user. In the event of malfunction
or apparent damage, make contact with Customer
Services.

Disposal

Do not dispose of the appliance in your normal
domestic waste. This also applies for used
bulbs.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations. In
case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.

Importer

KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
- 6 -