Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Skincare Technology Revitalight 1030
- Page 1 Model 1030 User Manual 77-I0PN230 Rev. A...
-
Page 2: Table Of Contents
Model 1030 User Manual TABLE OF CONTENTS FUNCTION.........................2 TREATMENT........................3 INDICATIONS FOR USE ....................4 CONTRAINDICATIONS.....................4 CLEANING.........................4 MAINTENANCE.........................4 CLASSIFICATION & SYMBOLS..................4 DISINFECTION / STERILIZATION..................4 SAFETY PRECAUTIONS....................5 SPECIFICATIONS......................5 CONTACT INFORMATION....................6 Page 1... -
Page 3: Function
Model 1030 User Manual Your Model 1030 system has been designed with a focus on safety, simplicity, and ease of use. You will be pleased with how efficiently the system works. FUNCTION If not on, switch the power switch on the back of the unit to the on position. The red pilot light on the switch will light. -
Page 4: Treatment
Model 1030 User Manual TREATMENT Make sure you read and understand all the information contained in this manual before operating unit. Place the protective eye covers on your client. With eye protection in place, a standard light source should be administered to the client. The client should confirm Figure 1 that the light could not be seen. -
Page 5: Indications For Use
Model 1030 User Manual INDICATIONS FOR USE The Panel Pulsator utilizes Light Emitting Diodes to provide light to the body. Generally indicated to: treat dermatological conditions and specifically indicated to treat moderate inflammatory acne • vulgaris (Blue, Blue + Red light); provide topical heating to promote increased blood flow, relaxation of muscle and relief of pain •... -
Page 6: Safety Precautions
Model 1030 User Manual SAFETY PRECAUTIONS Use only GlobTek power supply REF GMT21089-1815-T3, REF G1200LCP-Y-MED. Replacement, contact distributor - request replacement kit REF 84-??????? which includes REF 62-0000150 power supply. To fully isolate the Model 1030 from the supply mains, unplug the AC cord from the power supply. The equipment or system should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the equipment or system should be observed to verify normal operation in the configuration in which is will be used. -
Page 7: Contact Information
Model 1030 User Manual Photopulsation The light output is photo-modulated with a weighted set of frequencies that are continuously cycled between throughout the application. Photomodulation Frequencies* (Hertz - duration is seconds) 73Hz-4s, and 584Hz-1s. Thermal Considerations This device is intended to elevate the skin temperature to 40°C - 45°C (104°F - 113°F) when operated in Red-IR or Blue-Red modes.
Need help?
Do you have a question about the Revitalight 1030 and is the answer not in the manual?
Questions and answers