Compass; Clock - Cadillac Escalade 2015 Owner's Manual

5-6 Instruments and Controls

Compass

The vehicle may have a compass
display on the Driver Information
Center (DIC). The compass receives
its heading and other information
from the Global Positioning
System (GPS) antenna,
®
StabiliTrak , and vehicle speed
information.
The compass system is designed to
operate for a certain number of
miles or degrees of turn before
needing a signal from the GPS
satellites. When the compass
display shows CAL, drive the
vehicle for a short distance in an
open area where it can receive a
GPS signal. The compass system
will automatically determine when a
GPS signal is restored and provide
a heading again. See Compass
Messages on page 5-35 for the
messages that may be displayed for
the compass.

Clock

The infotainment system controls
are used to access the time and
date settings through the menu
system. See Home Page in the
infotainment manual for information
about how to use the menu system.
Setting the Clock
Time
To set the time:
1. From the Home Page, press the
SETTINGS screen button, then
press Time and Date.
2. Press Set Time, then press + or
to increase or decrease hours
or minutes, and change AM
or PM.
3. Press 12-24Hr for a 12 or
24 hour clock.
4. Press Back to go back to the
previous menu.
Date
To set the date:
1. Press the SETTINGS screen
button and press Time and Date.
2. Press Set Date and press + or
to increase or decrease month,
day, or year.
3. Press Back to go back to the
previous menu.
Auto Set
When on, the time and date will
automatically update.
To set auto set:
1. Press the SETTINGS screen
button, then press Time
and Date.
2. Press Set Time or Set Date.
3. Press Auto Set, then select
On-Cell Network or Off-Manual
to manually set the time
and date.
4. Press Back to go back to the
previous menu.