Audio/Video (A/V) Jacks - Cadillac Escalade User Manual

Rear seat entertainment system rse
Hide thumbs Also See for Escalade:
Table of Contents

Advertisement

If the foam ear pads attached to the
headphones become worn or
damaged, the pads can be replaced
separately from the headphone set.
To purchase replacement ear pads,
contact your dealer.
Battery Replacement
To change the batteries:
1. Loosen the screw to the battery
door on the left side of the
headphones.
2. Slide the battery door open.
3. Replace the two AAA batteries.
4. Replace the battery door and
tighten the screw.
Remove the batteries if the
headphones are not going to be
used for a long period of time.

Audio/Video (A/V) Jacks

The A/V jacks may be on the rear of
the floor console. They allow audio
or video cables to be connected
from an auxiliary device such as a
camcorder or a video game system.
The A/V jacks are colour coded:
Yellow for video input.
White for left audio input.
Red for right audio input.
Power for auxiliary devices is not
supplied by the radio system.
To use the auxiliary inputs of the
RSE system:
1. Connect the auxiliary device
cables to the A/V jacks.
2. Power on both the auxiliary
device and the RSE video
screen.
Changing the Source on the Video
Display Screens
The image from the auxiliary device
can be switched between the video
display screens.
To change the display:
1. Press the AUX button on the
remote control to change the
source of both video screens
from the DVD player to the
auxiliary device.
Infotainment System
2. Press the AUX button a second
time to change the left video
screen source to the DVD player
and the right video screen to the
auxiliary device.
3. Press the AUX button a third
time to change the left video
screen source to the auxiliary
device and the right video
screen to the DVD player.
4. Press the AUX button a fourth
time to change the source of
both video screens to the DVD
player.
How to Change the RSE Video
Screen Settings
The screen display mode,
brightness, and language can be
changed from the setup menu using
the remote control. To change a
setting:
z
1. Press
.
n
q
p
o
2. Use
,
,
,
, and
select the settings.
5
r
to

Advertisement

Table of Contents
loading

This manual is also suitable for:

2014 escalade rear seat entertainment

Table of Contents