Table of Contents
Advertisement
BASIC FUNCTIONS
WAIT/PAUSE FEATURE
Pauses are used for automated systems (i.e. voice mail, calling cards). Insert a
pause after a phone number then enter another group of numbers. The second set
of numbers is dialed automatically after the pause. This feature is useful for dialing
into systems that require a code.
1
. To insert a wait/pause, enter a phone number then press the Right Soft Key
[Options]. Select either 2-Sec Pause ("P" appears) or Wait ("W" appears)
and press the OK Key. Enter additional number(s) (pin number or credit card
number).
2
. Press the SEND Key
to dial or press the Left Soft Key [Save] to save phone
number.
3-WAY CALLING
With 3-Way Calling, you can talk to two people at the same time. When using this
feature, the normal airtime rates will be applied for each of the two calls.
1
. Enter the phone number to call then press the SEND Key.
2
. Once you have established the connection, enter the second number you wish
to call then press the SEND Key.
26
3
. When you're connected to the second party, press the SEND Key again to
begin your 3-Way call.
If one of the people you called hangs up during your call, you and the
Note
remaining caller stay connected. If you initiated the call and are the first to
hang up, all three callers are disconnected.
CALLER ID FUNCTION
Caller ID displays the number of the person calling when your phone rings. If the
caller's identity is stored in Contacts, the name appears on the screen.This is a
system dependent feature.
Please contact your service provider for details.
CALL WAITING FUNCTION
If you are on a call and you receive another incoming call, you will hear two beeps
and the caller's phone number will appear on the display. With Call Waiting, you
may put the active call on hold while you answer the other incoming call.
1
. To answer another call while on the phone, press the SEND Key. This places the
first call on hold. To switch back to the first caller, press the SEND Key again.
BASIC FUNCTIONS
27
Advertisement
Chapters
Table of Contents
