Advertisement
Quick Links
Advertisement
Related Manuals for Divus OPTIMA RC3
Summary of Contents for Divus OPTIMA RC3
- Page 1 Quick Start Guide RC3...
- Page 2 ATTENTION: this document explains only the OPTIMA interface! If you use KNXSERVER with CLASSIC interface, please refer to the documentation of the CLASSIC interface! Further information can be found in the internet (www.divus.eu), for specific questions you can also refer to our technical support: Phone: 0039/0471 631570 Mail: support@divus.eu...
- Page 3 If you are trying to connect to KNXSERVER for the first time, please proceed as listed below: Connect the power cable and a network cable to DIVUS KNXSERVER and wait around 1 minute until the system is ready. If KNXSERVER is connected directly to your computer, please use a cross-over cable;...
- Page 4 KNXSERVER - Quick start guide OPTIMA RC3 Check the communication with KNXSERVER by choosing “Run” on Windows “Start” menu and writing “ping 192.168.0.110”; if the output is similar to the one presented in figure, the communication is correct. If a timeout error is shown, the connection is not properly established. In such a case, try a direct connection with the PC using a cross-over cable, if not already done before.
- Page 5 KNXSERVER - Quick start guide OPTIMA RC3 The interface With the new DIVUS OPTIMA interface KNXSERVER offers you the perfect fusion of intuitive usability and functionality. The visualized contents can be adjusted optimally to your needs, moreover you have the possibility to attain access to all the functions of the interface in a matter of seconds through the symbols at the edge of the display area.
-
Page 6: Touch Gestures
In order to keep the usage of KNXSERVER as simple and intuitive as possible, the interface implements so-called touch gestures, which can be applied on the DIVUS TouchPCs used as clients. These should help the user with the navigation and make functions faster and simpler accessible. The following touch gestures have been integrated in OPTIMA RC3: „Swipe“... - Page 7 Just like the QuickNavigator, also the context menu of KNX functions is opened as pop-up window in consequence of a "LongClick" gesture. In OPTIMA RC3 the context menu can be used for example to add functions to the Home page or to schedule the selected function.
-
Page 8: The Administration Menu
KNX newcomers. Just try it out… you will be surprised! Theme configuration (free access): Here you can change the language of the displayed menus and dialogs. DIVUS OPTIMA RC3 is available in German, Italian and English. Network configuration (access restricted to installer): This menu can be used to adjust the network settings of KNXSERVER, in order to configure internet access or to activate the remote access to the administration menu. - Page 9 KNXSERVER - Quick start guide OPTIMA RC3 License and modules management (access restricted to installer): In this page, beneath the serial number of KNXSERVER you can also find the installed and licensed modules / functionalities. If you by additional modules, you will get a license code which can be entered in this page in order to activate the new functionalities.
- Page 10 KNXSERVER - Quick start guide OPTIMA RC3 RSS reader: This plug-in is able to show you RSS news from all round the world. Up to 10 RSS feeds can be displayed within this page. Only feeds in the xml format are supported.
- Page 11 KNXSERVER - Quick start guide OPTIMA RC3 Web browser: You need to access internet? No problem, the browser plug-in of KNXSERVER enables you to freely surf in the world wide web. You can even mark your preferred pages and...
- Page 12 KNXSERVER - Quick start guide OPTIMA RC3 KNX weather station: Integrate the values of your KNX weather station into KNXSERVER. This plug-in can be connected to the corresponding group addresses through the wizard and guarantees, that will have this information always ready in a quick and clear way.
- Page 13 KNXSERVER - Quick start guide OPTIMA RC3 Video surveillance: You are using IP cameras? Then this plug-in will be very convenient for you, since it permits to integrate up to 8 IP cameras into KNXSERVER. A click on one of the preview images shows the desired video stream in full screen mode.
- Page 14 Therefore, so called ClientPCs are required, which connect to KNXSERVER via network and can then show the contained visualization. As a ClientPC your laptop can be used as well as all TouchPCs of the DIVUS product range or also different mobile devices. This naturally means that also the configuration of KNXSERVER has to be done remotely, since it is not possible to access the device locally.
- Page 15 KNXSERVER - Quick start guide OPTIMA RC3 Notes: _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ Page 15/16...
- Page 16 marvelously si m ple & functi o nal...