4. Changing the glue roll format ..............16 Appendix ...................19 Compliance with FCC standards part 15 ............ 19 1. FCC as applies to PhotoBook PRO machines ............19 2. FCC norm as applies to the bar code reader ............. 20 060 677 289 A 10/2006...
User Manual - Safety 1. Warnings 1. Access areas for the user do not require tools to access them. Only main- tenance technicians approved by the manufacturer are authorized to access areas requiring a tool. 2. Some parts can be heavy to handle like the glue magazine or the machine itself.
Page 6
- User Manual socket cannot be accessed, include an isolating switch, quickly and easily accessible, with (as the outlet) the following characteristics: 100-240 V AC, 50/60 Hz. Power consumption should be: 100-240 V 4-2 A. Note: the machine is disconnected from the power network by disconnecting the switch from the outlet.
1. Position of the user To use Photobook PRO, face the side of the machine where are located the screen and the selection keyboard. The back of the machine is then to your left and the front is to your right.
User Manual - 3.2 Realizing a photo book without cover 1. 1. Put the photos in front of you without modifying their order or flipping them, so that you can see the first one normally (landscape view). 2. Since the 'Photo book product without cover' option has been selected, the machine initializes.
Use this abort mode when you realize too late that you do not use the appro- priate glue roll. Photobook PRO will then process the last inserted photo and the machine will make available the book not completed and without cover (whatever the selected type of product) avoiding you this way to remove the last inserted photo from the rollers.
User Manual - 5. Changing the user's language In the main menu, go to the 'Language option' and validate your choice by hitting . Select 'Français' or 'English', then validate your choice by hitting to go back to the main menu. 6.
A specific size of glue roll corresponds to each book size. Photobook PRO is delivered with as many cores (recipient rolls for the used glue strip) as there are roll sizes. When a core is full, use the empty glue roll as a new one.
Page 14
- User Manual 5. On the fore-roll arbor, put the glue roll in such a way that it unwinds underneath and forward (opposite picture). 6. Put the second pinion flange and place the fixing clip as you did on the back roll arbor. 7.
User Manual - 10. Turn on the magazine (always in vertical posi- tion) in such a way that you can see its upper part. Stick the beginning of the leader onto the core (red arrow on the opposite picture). For this, use the black scotch tape at the beginning of the leader.
- User Manual 3. Changing a finished glue roll Follow the whole procedure (described in the Loa- ding the glue roll chapter) to change the glue roll. Reminder: keep each empty glue roll (see opposite picture), and this for each roll size, so that you can use it as a new core for next use at the same size.
Page 17
User Manual - 5. Load the magazine with the new glue roll format and the appropriate core. Make sure you respect the path of the glue strip. Note: keep both rolls and mark the one which is adhesive. 6. Stick approximately 10 cm of the glue- less strip onto the adhesive side of the glue strip (as between points A and B on the opposite drawing).
Consult the dealer or an experienced radio/TV technician for help. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by KIS may cause, harmful interference and void the FCC authorization to operate this equipment.
- Manuel Utilisateur 2. FCC norm as applies to the bar code reader Notice This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.