Summary of Contents for ST-Lab M-530
-
Page 1: User Manual
M-530 Bluetooth Stereo Speaker User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. -
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ............3 1.1 Product Introduction ............ 3 1.2 Features ................ 3 1.3 Package Contents ............3 1.4 Hardware Description ..........4 Chapter 2: Getting Started ..........7 2.1 Charging the speaker ........... 7 2.2 Power up ..............7 2.3 Get connected via Bluetooth ........ -
Page 3: Chapter 1: Introduction
connect your Bluetooth device Easy to connect – pair once and then connect instantly every time 1.3 Package Contents 1 x M-530 Bluetooth Stereo Speaker 1 x User Manual 1 x 3.5 mm stereo audio cable ... -
Page 4: Hardware Description
1.4 Hardware Description Volume - Volume + Bluetooth Pair Button/LED Line-In DC Power Input MN4000000072 Page 4... - Page 5 Power switch MN4000000072 Page 5...
- Page 6 Function Operation LED Indicator Charging the Connect the speaker to Red LED will stay Speaker PC or Power Adapter Waiting Turn on the power Green LED will pairing switch from “Off” to slow flash “On” Enter pairing Press and hold Green LED will mode “Power/Function”...
-
Page 7: Chapter 2: Getting Started
Chapter 2: Getting Started 2.1 Charging the speaker Make sure the speaker is fully charged before initial use. Connect the speaker via the power input port to your PC or 5V power adapter using USB charging cable. The LED will illuminate in red while charging and will turn off once fully charged. - Page 8 for approximately 2-3 seconds and do not release it. The LED will changes from slow flash to fast flash. Go to the Bluetooth Manager of your Bluetooth device and then select the Bluetooth Speaker from the list. Enter “0000” if a password is required. When the Bluetooth connection is made, the Green LED will keep Once connected, select your music or videos and see your sound instantly amplified with Bluetooth Speaker.
-
Page 9: Plug & Play Non Bt Device With Aux Cable
2.4 Plug & Play Non BT Device with Aux cable Connect the speaker with any audio device directly by using supplied 3.5mm cable. Connect one end of the 3.5mm cable to the Line-In port on the Bluetooth Speaker and the other end of the cable to the 3.5’mm audio output port on your music player. - Page 10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 11 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the M-530 and is the answer not in the manual?
Questions and answers