60 cm (23.6”) LED BLU-TV Melbourne Achtung Dieses Symbol dient dazu, den Anwender auf das Vorhandensein nicht isolierter “Hochspannung” im Geräteinnern hinzuweisen. Diese Spannung kann ausreichend hoch sein, um elektrische Schläge oder Brände hervorzurufen. Dieses Symbol soll den Anwender auf wichtige Bedienungs- und Wartungsinformationen hinweisen, die Entsorgung von Altgeräten...
60 cm (23.6”) LED BLU-TV Melbourne Zubehör Installation Standfuß anbringen So montieren Sie den Standfuß Benutzerhandbuch Fernbedienung Rückansicht des TVs Standfuss TV Platte Netzteil 1. Setzen Sie das Gerät (Teil A) auf den Fuß (1). 2. Verschrauben Sie den Fuß von der Unterseite (2) mit den vier Schrauben 4xST4X16F.
60 cm (23.6”) LED BLU-TV Melbourne Einführung Dieses Fernsehgerät ist für den Empfang von Digitalfernsehen über terrestrische Antenne, sowie Analog-, Kabel-, und Satellitenfernsehen ausgelegt. Für Satellitenempfang können Sie eine feste Parabolantenne verwenden, die auf Astra 19,2° Ost ausgerichtet und mit einem Universal-LNB bestückt ist. Sie können auch andere Parabolantennen und LNBs benutzen, diese müssen aber zunächst konfiguriert werden (erfordert größere Kenntnisse).
60 cm (23.6”) LED BLU-TV Melbourne Anschlüsse Headphone: Anschluss für Kopfhörer oder ähnliche Geräte Common Interface: CI-Schacht. COMMON-INTERFACE-EINSCHUB VERWENDEN Der Common-Interface-Einschub (CI) dient zur Aufnahme von CA-Modulen und einer Smart-Card für Pay-TV und Zusatzdienste. Wenden Sie sich an Ihren Pay-TV-Anbieter, um weitere Informationen über die Module und Abonnements zu erhalten.
60 cm (23.6”) LED BLU-TV Melbourne Fernbedienung STANDBY: STANDBY ASPECT AUT O AUTO: P. MODE S.MODE SLEEP MUTE ASPECT: P.MODE: S.MODE: CH.LIST SLEEP: MUTE: TV MENU EXIT DISPLAY SOURCE 0-9: A-B: CH.LIST: ENTER TV MENU: EXIT: DISPLAY: VOL- SOURCE: FA V...
Page 9
60 cm (23.6”) LED BLU-TV Melbourne STANDBY ASPECT AUT O P. MODE S.MOD SLEEP MUTE CH.LIST REPEAT: DTV/RADIO: TV MENU EXIT DISPLAY SOURCE Videotext-Funktionen arbige Tasten: SIZE: ENTER HOLD: INDEX: VOL+ REVEAL: VOL- TEXT: SUBPAGE: FA V SUBTITLE AUDI O...
60 cm (23.6”) LED BLU-TV Melbourne Automatische Installation Land - Wählen Sie Ihren Standort aus. Treffen Sie Ihre Aus- wahl mit den Tasten / , und drücken Sie ENTER Wenn Sie Ihren Fernseher zum ersten Mal einschalten, zur Bestätigung. erscheint der Assistent zur Erstinstallation (siehe folgen-...
60 cm (23.6”) LED BLU-TV Melbourne Kanalsuche Kanalsuche Wählen Sie die gewünschte Sendersuche aus. Treffen Wählen Sie die gewünschte Sendersuche aus. Treffen Sie Ihre Auswahl mit den Tasten , und drücken Sie Sie Ihre Auswahl mit den Tasten , und drücken Sie ENTER zur Bestätigung.
60 cm (23.6”) LED BLU-TV Melbourne OSD-Menü Bildschärfe Hiermit stellen Sie die Schärfe des Bildes ein. Drücken , um die Bildschärfe zu verringern. Drücken Sie Video (Bild) um die Bildschärfe zu erhöhen. Tint (Farbton) Hierüber stellen Sie den Farbton ein (nur für die Fernseh- norm NTSC).
60 cm (23.6”) LED BLU-TV Melbourne Audio Normal Hörbehindert (Optional) Sehbehindert Sehbehindert Balance Tiefen Höhen Sound Surround Equalizer Rock Live Tanz Tunermodus Techno Klassik Soft Autom. Lautst.-Kontr. Kabel Satellit Sound Type Antenne Kanäle Kanalsuche Hinweis:...
60 cm (23.6”) LED BLU-TV Melbourne Einzelsuche Digital (DTV) Manuelle analoge Suche Einzelsuche Digital (DTV) Kanalsuche Kanal überspringen Kanal sortieren Kanal bearbeiten Analoge Feinabstimmung Kanalliste löschen Antenne einrichten Kanal überspringen Manuelle analoge Suche...
60 cm (23.6”) LED BLU-TV Melbourne Kanal sortieren Zeiteinstellung Untertitel Kanal bearbeiten Digital Untertitel Sprache 1 Digital Untertitel Sprache 2 Untertiteltyp Teletext Digitale Videotext Sprache Setup Sprache für Seitendecodierung OSD Sprache Bildschirmmodus Schwarzbildschirm...
60 cm (23.6”) LED BLU-TV Melbourne Zeiteinstellung Untertitel Beschreibung, siehe Seite 15. Teletext Zeitzone Hier legen Sie die Zeitzone fest. Drücken Sie die Tasten , um die gewünschte Zeitzo- Beschreibung, siehe Seite 15. ne auszuwählen. Audiosprache Zeit Damit diese Funktion korrekt arbeitet, müssen entspre- Hierüber stellen Sie das Datum und die Uhrzeit.
60 cm (23.6”) LED BLU-TV Melbourne Erste Installation Kanal blockieren Standardwerte setzen Sperre Parental Guidance (Kindersicherung) Kennwort System Sperre Kennwort ändern Alles löschen...
60 cm (23.6”) LED BLU-TV Melbourne Hotel Modus Auf USB klonen Hotel Modus Wiederherstellen von USB Sperren zurücksetzen Quellensperre Auto-Einstellung Hinweis: H-Position Quellenvoreinstellung V-Position Empfangstyp Phase Programmvoreinstellung Takt Max. Lautstärke Lautstärkenvoreinstellung...
60 cm (23.6”) LED BLU-TV Melbourne Textoptionen Text Drücken Sie ENTER, um die Songtextoptionen festzule- gen. (Nur verfügbar, wenn Songtexte zum aktuellen Song abgespeichert wurden.) Nur Audio Drücken Sie die Taste ENTER, um den Bildschirminhalt zu lö tionen wieder anzuzeigen.
60 cm (23.6”) LED BLU-TV Melbourne Fehlerbehebung Fernsehgerätes Falls kein Bild erscheint oder sich die Bild- und Ton- qualität Ihres Fernsehgerätes verschlechtert, gehen Sie Fernsehnorm PAL/BG/DK/ I zunächst folgendermaßen vor. Überprüfen Sie ebenfalls alle mit dem Produkt verbundenen Geräte, um den Fehler SECAM BG/DK/L/L‘...
Page 31
60 cm (23.6”) LED BLU-TV Melbourne *DUDQ]LD GHO SURGXWWRUH *UD]LH SHU DYHU DFTXLVWDWR TXHVWR SURGRWWR PRGHUQR 7UDPLWH HVVR VSHULDPR GL SRWHU9L RIIULUH RUH H RUH GÚLQWUDWWHQLPHQWR /D SURGX]LRQH GL TXHVWR GLVSRVLWLYR DYYLHQH FRQ XQ SURFHVVR FRPSOHVVR FKH QRL PRQLWRULDPR DWWHQWDPHQWH FRQ FRVWDQWL FRQWUROOL GL TXDOLW£ 4XHVWL FRQWUROOL FL FRQVHQWRQR GL JDUDQWLUH OÚDOWD TXDOLW£...
Page 32
60 cm (23.6”) LED BLU-TV Melbourne $OOR VFRSR GL YHULILFDUH LO UHFODPR H GL JDUDQWLUH OD FRUUHWWD ODYRUD]LRQH 9L FKLHGLDPR GL LQYLDUFL WXWWR LO FRQWHQXWR GHOOD FRQIH]LRQH FRPSUHVL WXWWL JOL DFFHVVRUL HV 7HOHFRPDQGR VXSSRUWR VXSSRUWR SHU LO PRQWDJJLR D SDUHWH FDYR $9 HFF /D JDUDQ]LD QRQ FRSUH DOWUH UHVSRQVDELOLW£...
Page 33
60 cm (23.6”) LED BLU-TV Melbourne Hersteller: Schmid Electronics GmbH In Dürrfeldslach 3...
Page 34
60 cm (23.6”) LED BLU-TV Melbourne Contents Caution Safety Information Accessories Technical Specification Product Introduction Front View Rear View Connections Remote Control Basic Operation 9-12 Auto installation setup Basic Operation OSD Menu 13-27 1. Video menu 13-14 2. Audio menu 15-16 3.
60 cm (23.6”) LED BLU-TV Melbourne Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.
60 cm (23.6”) LED BLU-TV Melbourne Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below . Disclaimer The illustrations of the TV, accessories and menus shown in this User’s Manual may differ from the actual product.
Page 37
60 cm (23.6”) LED BLU-TV Melbourne Safety Information Physical safety...
60 cm (23.6”) LED BLU-TV Melbourne Accessories Batteries Mains adaptor User’s Manual Remote control MINI YPbPr MINI AV 2 x 1.5V, size * Note: The configuration of the components may look different from the following illustration Technical Specification - TV System PAL BG/DK/I SECAM BG/DK L/L’...
60 cm (23.6”) LED BLU-TV Melbourne Product Introduction Front View SOURCE: Display the input source menu. MENU: Display/exit the OSD menu. CH+/-: Scan through channels. VOL+/-: Adjust the volume. POWER: Turn on/standby the TV set. LED indicator Remote Control window(keep clear) (IR) Infrared Receiver: Receives IR signals from the remote control.
60 cm (23.6”) LED BLU-TV Melbourne Connections Headphone: Connect it to your headphone or other audio equipment. Common Interface: CI slot. USING YOUR COMMON INTERFACE SLOT Common Interface The Common Interface (CI) slot is designed to accept the Conditional Access Module (CAM) and Smart Card in order to view the pay TV programmes and additional services.
60 cm (23.6”) LED BLU-TV Melbourne Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LED BLU-TV. The remote control may not work correctly if it is operated out of range or out of angle.
Page 42
60 cm (23.6”) LED BLU-TV Melbourne Remote Control STANDBY ASPECT AUTO P.MODE S.MODE SLEEP MUTE CH.LIST TV MENU EXIT DISPLAY SOURCE REPEAT: Repeat playing in USB mode. DTV/RADIO ENTER Colour buttons: short cuts-follow the coloured links in the text. SIZE: Press to see top half of page double size, Press again to...
Page 43
60 cm (23.6”) LED BLU-TV Melbourne Auto installation setup When you initially turn on the TV you will see the first time installation menu as below: Auto installation setup Picture Mode - Selection the picture mode (Bright, Cinema, Sport or Home)
Page 44
60 cm (23.6”) LED BLU-TV Melbourne Language press ENTER to confirm:...
60 cm (23.6”) LED BLU-TV Melbourne Basic Operation Power on/off 1. Connect to the TV to the power supply and turn on the switch. 2. -To turn on the TV Press POWER button on the TV or remote control. STANDBY...
Page 50
60 cm (23.6”) LED BLU-TV Melbourne Sound Type Press buttons to select(Stereo, Dual1, Dual2, Mix). If there is related information, it can be shown. Visually Inpaired...
Page 52
Press Menu to show "Are you sure to skip ATV Press Menu to show "Are you sure to skip DTV SCAN?" SCAN?" Input Frequency by number buttons, select Scan Down to search channel. OK button to search channel.
Page 53
60 cm (23.6”) LED BLU-TV Melbourne All available TV receiver sources can be set one after the other. Switching between the single source occurs in the sub menu “TV” “via” Tuner Mode.
Page 54
60 cm (23.6”) LED BLU-TV Melbourne ASPECT RATIO Auto ASPECT RATIO Press buttons to select 16:9, 4:3, Zoom1, Zoom2, Auto, Point to point (only in HDMI mode available). (must be supported by channel) (must be supported by channel)
Page 55
60 cm (23.6”) LED BLU-TV Melbourne after 3 or 4 or 5 Hours or 4 or 5Hours OSD Timer Sets the OSD Timer. None, 5s, 10s, 15s, 30s, 45s, 60s. Description, see page 20...
Page 58
60 cm (23.6”) LED BLU-TV Melbourne Parental Sets the age rating. None or from 4 to 18 years old. Guidance...
Page 59
60 cm (23.6”) LED BLU-TV Melbourne Hotel Mode Hotel Mode Hotel Mode Default Source...
Page 60
60 cm (23.6”) LED BLU-TV Melbourne Hotel Mode Channel Type Select the channel type. Default Program Select the default channel. Max Volume Set the max volume for the TV. Set the default volume for the TV whenit turns on. Default Volume Copy the settings to USB.
Page 62
60 cm (23.6”) LED BLU-TV Melbourne SOURCE...
Page 63
60 cm (23.6”) LED BLU-TV Melbourne Photo Press Green e option, and press ENTER button to Play photo Rotate photo ZOOM...
Page 64
60 cm (23.6”) LED BLU-TV Melbourne Press Green e option, and press ENTER button to 3 3 0...
Page 65
60 cm (23.6”) LED BLU-TV Melbourne Press Green ENTER button to 3 3 1...
Page 66
60 cm (23.6”) LED BLU-TV Melbourne Background Music On Press Green e option, and press ENTER button to adjust the following functions Background Music On Press ENTER to turn On/Off the background music.
60 cm (23.6”) LED BLU-TV Melbourne Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance.
60 cm (23.6”) LED BLU-TV Melbourne Waste Electrical Recycling Correct disposal of Product cations This sign indicates that this product may not be disposed of with your regular household waste. The recycling and separate collection TV System AL/BG/DK/ I of such products is your responsibility. Please SECAM BG/DK/L/L’...
60 cm (23.6”) LED BLU-TV Melbourne Instructions for fixing stand Instructions for fixing stand Note: the pictures below are only for reference The parts needed for installing the stand (supplied) TV stand TV board Rear cabinet of TV Screws(4 x ST4 x 16F) Installation (Put your TV on the table with its rear cabinet facing upwards.)
Need help?
Do you have a question about the Melbourne and is the answer not in the manual?
Questions and answers