Advertisement
SPECIFICATIONS
3D Mode
Weight
Synchronisation Frequency
Synchronisation
Transmittance
Contrast
SC
DC
Power Supply
Battery Capacity
Battery Type
Acceptance Angle
Receiving Frequency
Bluetooth Standard
Battery Working Time
Working Conditions
CONNECTION METHOD
Before use, please ensure the 3D glasses have connected to the 3D TV via bluetooth to ensure that
your glasses will receive the synchronisation signal.
1. Turn on the TV and ensure that the 3D output mode is set and running.
2. While TV is displaying the 3D image, press and hold the Power Switch for 1.5 seconds to
make the glasses attempt to pair with the TV.
3. When the LED indicator light starts flashing once every 0.5 seconds, this means the glasses
have paired correctly.
4. When the light stops flashing within 10 seconds, the 3D glasses lens shutters will activate
and you can watch the 3D images.
5. If the blue light continues flashing, this indicates that no successful connection has been
made, at which point the glasses will turn themselves off automatically after 10 seconds.
Please follow the above steps again to re-connect.
Active Shutter
30+-2g (No packaging)
120Hz
Bluetooth
37 +/- 2%
1000:01:00
10uA
1.0mA
Lithium Button Battery
150mAh
CR2025
360
2.4GHz
Bluetooth 3.0
120 hours+
Operating Temperature: 0 ~ 40C
Storage Temperature: -5 ~ 50C
Advertisement
